Selects the font for the stamp text string.
Selects the font style for the stamp text string.
Selects the font size for the stamp text string.
Selects a frame that encloses the stamp text string.
If a large font size is selected for Size, characters may extend outside of the stamp border.
Shows the current color for the stamp.
To select a different color, click Select Color... to open the Color dialog box, and select or create a
color you wish to use as a stamp.
When Stamp Type is Bitmap
Specifies the name of the bitmap file to be used as the stamp.
Opens the dialog box to open a file.
Click this button to select a bitmap file to be used as a stamp.
Adjusts the size of the bitmap file to be used as a stamp.
Moving the slider to the right increases the size, moving the slider to the left decreases the size.
Transparent white area
Specifies whether to make white-filled areas of the bitmap transparent.
Check this check box to make white-filled areas of the bitmap transparent.
• Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType Font to Arial, Style to
Regular, Size to 36 points, Outline unchecked, and Color to gray with the RGB values (192, 192,
The Placement tab allows you to set the position where the stamp is to be printed.
Shows the status of the stamp configured in each tab.
Specifies the stamp position on the page.
Selecting Custom from the list allows you to enter values for the X-Position and Y-Position
Specifies the angle of rotation for the stamp. The angle can be set by entering the number of
Negative values rotate the stamp clockwise.