Canon Ij Network Tool Screen - Canon MG3600 Series Online Manual

Hide thumbs Also See for MG3600 Series:
Table of Contents

Advertisement

Canon IJ Network Tool Screen

This section describes the items and menus displayed on the Canon IJ Network Tool screen.
Items on Canon IJ Network Tool Screen
Canon IJ Network Tool Menus
Items on Canon IJ Network Tool Screen
The following item is displayed on the Canon IJ Network Tool screen.
1. Printers:
The printer name, status, printer model name, and port name are displayed.
A check mark next to the printer in the Name list indicates it is set as the default printer.
Configuration changes are applied to the selected printer.
2. Update
Performs printer detection again. Click this button if the target printer is not displayed.
Important
• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.
• If No Driver is displayed for the name, associate the port with the printer.
When Printer Driver Is Not Associated with Port
• If Not Found is displayed for the status, check the followings:
• The wireless router is turned on.
• When using wired LAN, the LAN cable is connected properly.
• If the printer on a network is not detected, make sure the printer is turned on and click Update.
It may take several minutes to detect printers. If the printer is not yet detected, connect the
machine and the computer with a USB cable and click Update.
• If the printer is being used from another computer, a screen is displayed informing you of this
condition.
257

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents