Oi31 - Curtis RU-150-20 User Manual

OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING.
Keep body parts clear of hot surfaces on the outside of the urn.
The urn is factory preset for optimal performance.
Thermostat
Main power
switch
The brewer should be
main power toggle switch,
located on the bottom of the
control box. The thermostat
should be set to ON and the
thermostat light should be
is hot).
4 Make sure that the liner is
empty before brewing. Insert
top of the urn.
2 Remove the urn lid and rotate
the spray arm to the side.
5 Rotate the spray head over
the bed of coffee inside the
on top of the urn.
3 Remove the brew basket and
the basket with the proper
amount of ground coffee.
Make sure that the coffee is
Brew light
BREW
Batch
button
size switch
STOP button
6 Make sure the batch size
selector switch is in the
desired position, then press
the BREW button. Brewing
will begin immediately. To
stop brewing before the
cycle is complete, press the
STOP button.

OI31