Toggle Between Calls Before Completing Transfer; Hold Call; Mute Phone - Cisco 3905 User Manual

Basic Operations
Procedure
Step 1 Verify that you are on an active call (not on hold).
Step 2
Press Transfer
Step 3
Enter the transfer recipient's phone number or press a speed-dial button.
Step 4 Wait for the recipient to answer, or skip to the next step while the call is ringing.
Step 5
Press Transfer

Toggle Between Calls Before Completing Transfer

After you connect to the transfer recipient—but before you transfer a call to this party—you can press the
Hold/Resume button to toggle between the two calls. This allows you to consult privately with the party on
each call before you complete the transfer.
Procedure
Step 1
Press the Hold/Resume button to toggle between the party that you intend to transfer and the transfer recipient.
Step 2 After you finish speaking with the transfer recipient, press the Transfer button to complete the transfer.

Hold Call

Hold allows you to put an active call into a held state.
Procedure
Step 1
To put a call on hold, press the Hold/Resume button
The party that is put on hold hears the preset music.
Step 2
To resume the call, press the Hold/Resume button

Mute Phone

You can block audio input for your handset, headset, and speakerphone, so that you can hear other parties on
the call but they cannot hear you.
.
again.
Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Toggle Between Calls Before Completing Transfer
.
.
13