Important Notice - Emerson Rosemount 3051S Quick Installation Manual

Electronic remote sensors with hart protocol

Hide thumbs Also See for Rosemount 3051S:

Reference manual (240 pages)

Manual (96 pages)

Manual supplement (60 pages)

Table Of Contents

Table of Contents

Rosemount 3051S ERS System

trademarks of Rosemount Inc.

Rosemount Inc.

8200 Market Boulevard

Chanhassen, MN USA 55317

T (US) (800) 999-9307

T (Intnl) (952) 906-8888

F (952) 949-7001

Emerson Process Management

Asia Pacific Private Limited

1 Pandan Crescent

Singapore 128461

T (65) 6777 8211

F (65) 6777 0947/65 6777 0743

This installation guide provides basic guidelines for the Rosemount 3051S ERS System (reference

manual document number 00809-0100-4804). It does not provide instructions for diagnostics,

maintenance, service, or troubleshooting. This document is also available electronically on

www.rosemount.com.

Explosions could result in death or serious injury:

Installation of this transmitter in an explosive environment must be in accordance with the appropriate

local, national, and international standards, codes, and practices. Please review the approvals

section of the 3051S ERS System reference manual for any restrictions associated with a safe

installation.

• Before connecting a Field Communicator in an explosive atmosphere, ensure the instruments in

the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.

• In an Explosion-proof/Flameproof installation, do not remove the transmitter covers when power

is applied to the unit.

Process leaks may cause harm or result in death.

• Install and tighten process connectors before applying pressure.

Electrical shock can result in death or serious injury.

• Avoid contact with the leads and terminals. High voltage that may be present on leads can cause

electrical shock.

Conduits/Cable Entries

• Unless otherwise marked, the conduit / cable entries in the 3051S ERS housing enclosure use a

-14 NPT form. Only use plugs, adapters, glands, or conduit with a compatible thread form

when closing these entries.