Table of Contents
Advertisement
Basic operations
1
Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
2
Press the OK key to open the
next level submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
3
return to the previous menu.
Press the 34 keys to highlight the desired menu.
4
5
Press SYSTEM MENU to quit the setup menu.
When you quit the setup menu, the settings
will be stored in the player's memory even if the
player is switched to power off.
General setup menu
Some settings are needed in this menu. they are:
DISC LOCK, PROGRAM, OSD LANGUAGE and
SCREEN SAVER and VFD Dim.
Follow the steps below:
1
Press the SYSTEM MENU key to enter the setup
menu.
Press the 34 keys to choose the GENERAL
2
SETUP menu.
3
Press the OK key to confirm selection.
Disc lock
When the disc is locked, the player will store its
typical code into the memory
for the future identification. For the next playback,
the DVD player will prompt to enter
the password.
Press the 34 keys to highlight
1
the DISC LOCK item in the
GENERAL SETUP menu.
2
Enter its submenu by pressing the
2 key.
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
Press the 1 key to return to the GENERAL
3
SETUP menu.
NOTE:
1. When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
2. To change the password , refer to the option
PASSWORD in the PREFERENCES menu .
DVD 724K/781 English
"
17
«
Program
(not available for DVD discs)
To choose the PROGRAM item, press the 34
1
keys.
Press the 2 key to move the
2
cursor to the field of the
submenu to choose the item
ON.
ON: Enter the PROGRAM item.
3
Press OK to enter the program page.
Input your favorite track
1
Input valid track number by
pressing the numerical keys.
Press the 1 234 keys to move
2
the cursor to the next selected
position.
3
Repeat the steps above to input another track
number until the whole program is completed.
Exclude a track
Press the 1 234 keys to move the cursor to
1
track you want to exclude.
2
Input an invalid track number to cancel this track.
Cancel all tracks
Press the 1 234 keys to move the cursor to the
1
CLEAR button.
2
Press OK, all tracks will be cancelled.
3
Now you can input your favorite tracks again.
Playback tracks
When programing is completed,
Press the 1 234 keys to move the cursor to the
1
PROG button.
2
Press OK.
DVD player will playback the selected
program under the programed sequence.
Stop the program playback
At the PROGRAM page, When programing is
completed,
Press the 1 234 keys to move the cursor to the
1
QUIT button.
2
Press the OK key to quit this menu.
2002.4.30, 12:06 PM
Setup Menu
17
Advertisement
Table of Contents
