Specification - LG 55LH80YD-AB Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range
This specification sheet is applied to the LCD TV used LB92F
chassis.

2. Specification

Each part is tested as below without special appointment
1) Temperature : 25 ± 5°C (77 ± 9ºF), CST : 40 ± 5ºC
2) Relative Humidity : 65 ±10%
3) Power Voltage : Standard input voltage
(100-240V@ 50/60Hz)
* Standard Voltage of each products is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
4. General Specification(TV)
No Item
1. Broadcasting System
2. Receiving System
3. Input Voltage
4. Market
5. Screen Size
6. Aspect Ratio
7. Tuning System
8. Module
9. Operating Environment
10. Storage Environment
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
1) PAL-BB(Analog-Australia)
2) DVB-T(Digital)
1) Analog :Upper Heterodyne
2) Digital:COFDM, QAM
1) AC 100 ~ 240V 50/60Hz
Australia
42 inch Wide(1920 ◊ 1080)
47 inch Wide(1920 ◊ 1080)
55 inch Wide(1920 ◊ 1080)
16:9
FS
LC420WUF-SBB1 (without inverter)
LC470WUF-SBB1 (without inverter)
LC550WUD-SBA1
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
3. Test method
1) Performance : LGE TV test method followed.
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC specification
- Wireless : Wireless HD specification(Option)
FHD + 120Hz
FHD + 120Hz
FHD + 120Hz
LGD
LGD
LGD
- 6 -
Remark
Media BOX Rear 1ea
Analog: VHF/UHF 0-75/CATV 2-44
Digital: VHF -6-12, UHF 27-69
42LH80YD-AB
47LH80YD-AB
55LH80YD-AB
42LH80YD-AB
47LH80YD-AB
55LH80YD-AB
LGE Internal Use Only