1. FULL CERTIFICATION With products from seca you are not only purchasing technology developed over a century, but also quality that has been validated by official bodies, the legal sys- tem and relevant institutes. seca products comply with European directives, standards and national laws. With seca you are buying into the future.
170 years and as a market leader in many coun- tries, is constantly setting new standards with its innova- tive developments for weighing and measurement.
Page 5
You can find your local service partner at www.seca.com or just send an e-mail to service@seca.com. • Make sure you only use genuine seca acces- sories and spare parts. Otherwise the war- ranty provided by seca will become null and void.
English 3.3 Handling (rechargeable) batteries The device is supplied with 6 batteries, type AA (Mignon). This type of battery is not rechargeable. Please take note of the following safety information. WARNING! Personal injury with improper handling Batteries contain harmful substances which may explode if not handled properly.
4. OVERVIEW 4.1 Controls/Features No. Control/Feature Function Arrow key • During weighing: - Press briefly: Activate Hold function hold - Hold down: Activate Tare function tare • In menu: - Select submenu, select menu item - Adjust value Enter key •...
English 4.2 Symbols in display Symbol Meaning Operation with power supply unit Batteries are weak Non-calibratable function active Weighing range currently in use: 1: More precise weight indication with reduced load- bearing capacity 2: Maximum load-bearing capacity Differential value function (BMIF: Breast Milk Intake Function) active Measured result in memory location 1 (BMIF function) Select memory location (BMIF function)
Page 9
Text/Symbol Meaning For Canada: Device licensing number issued by authority Industry Canada Device complies with EC standards and directives. Symbol for FCC (USA) Only operate device with DC Do not discard with household waste 40 •...
This may cause the scales to overheat, catch fire, melt or short-circuit. − Only use genuine seca plug-in power supply units with 9V or a controlled 12 V output volt- age. 1. Insert the power plug necessary for your power supply in the power supply unit.
English 5.2 Set up scales The scales are fully assembled on delivery. ATTENTION! Incorrect measurement with force shunt If the housing of the scales is resting on some- thing, e.g. a towel, the weight measurement will not be correct. − When setting up the scales, ensure that they only make contact with the ground via the foot screws.
Start weighing 1. Check that there is no load on the scales. 2. Press the Start key. se[A The display will read and then quickly run through all elements of the display. The scales are ready for operation when the display 0.
"Activate Autohold function (Ahold)" on page 48. Transmit measured If the scales are integrated in a net- seca 360° wireless work, you can transmit the measured results to results to a radio receive-ready equipment (wireless printer, PC with receiver wireless USB module) at the touch of a button.
♦ Press the Start key. Switch off scales NOTE: When in battery mode, the scales will switch off automatically after a short period if no load is placed on them. 6.2 Use additional functions Additional functions are available in the menu for the scales.
English 4. Confirm your selection with the Enter key. send The current selection for the menu item or a sub- print menu is displayed (here level "0"). 5. To change your selection or call up another sub- hold menu, keep pressing the arrow key until the re- tare quired selection is displayed (here: level "2").
CALC 12. Select the menu item 13. Confirm the selection. 14. Select the memory location where you stored the baby's initial weight (here: 2). Arrows can be seen flashing in the display. 15. Confirm your selection. The weight difference, i.e. the quantity of food consumed, is displayed.
English 3. Select a menu item: – Press: Acoustic signal whenever a key is pressed – Hold: Acoustic signal with a stable weighing value. 4. Confirm your selection. The current selection is displayed. 5. Select the setting you require: – On –...
Data can be transmitted to the following equipment devices: • seca wireless printer • PC with seca USB wireless module seca wireless groups network operates with wireless seca 360° wireless groups.
• 1 set of personal scales • 1 length measuring device • 1 seca wireless printer • 1 PC with seca USB wireless module Channels The devices communicate with each other within each wireless group via three channels (C1, C2, C3). This ensures reliable, troublefree data transmission.
7.2 Operate scales in a wireless group All functions required to operate the device in a seca wireless group can be found in the submenu "rF". For information how to navigate in the menu see page 46. …… • Channel 1 (C1)
Page 22
NOTE: With certain devices a special switch-on proce- dure has to be followed if they are to be inte- grated in a wireless group. Consult the user manual for each device. seca 360° wireless Network • 53...
(APrt) are automatically printed out by a wireless printer logged into the wireless group. NOTE: This function is only available if the "learn" func- tion has been used to integrate a seca wireless printer in the wireless group. 54 •...
NOTE: This function is only available if the "learn" func- tion has been used to integrate a seca wireless printer in the wireless group. 1. Switch the device on. 2. Select the menu item "Time" in the "rf" submenu.
NOTE: For further operation of the wireless printer see its user manual. 8. CLEANING To clean the tray and housing of the scales use a household detergent or standard disinfectant as required. Take note of the instructions provided by the manufacturer.
Page 26
English Malfunction Cause/Remedy • The device was unable to send measured results to the radio receiver (seca wireless prin- ter or PC with seca USB wireless module). – Check that the scales are integrated in the wireless network. – Check that the receiver is switched on.
− You can find your local service partner at www.seca.com or just send an e-mail to service@seca.com. Ensure that recalibration is carried out by authorised persons in accordance with the national legal require- ments.
This sticker will be secured with an additional seal by a person authorised to perform recalibration. The recalibration sticker is available from the seca customer service department under the number 14-05-01-886. 11.TECHNICAL DATA...
Additional accessories 418-00-00-009 • Head and foot rest • Length measuring device country-specific variants seca 233 13.DISPOSAL 13.1 Disposal of device Do not discard with household waste. The device must be disposed of properly as electronic waste. Comply with the national provisions applicable in your country.
Page 31
The warranty shall become null and void where the device is opened by persons not expressly authorised to do so by seca. We ask customers based abroad to contact their local sales agent direct in the case of warranty claims.