Set-Up - Pyramat PM440 Owner's Manual

SET-UP

1
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
4
Twist the volume knob on the
control panel to click on and test
the power. When the power is
on all the knobs light up.
Twist volume knob to power off
the Sound Rocker, then proceed
to the connection method shown
for your audio/video device.
2
Place the Sound Rocker so
that the control panel is less than
11 ft./3.5 meters from the power
source.
3
Connect the 12-volt AC power
adapter to the electrical outlet and
then to the power AC port on the
control panel.
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.