Pyle PSWLE08 Installation Manual

Part 3- Part 3- Hang the screen Hang the screen
Hook the screen onto the wall plate. Then swing the screen down. Once the screen is
settled, pull down the Supportable lever, so that you can insert the cable.
NOTE: NOTE: Always use an assistant or mechanical lifting equipment to safely lift and
position heavy equipment.
TV connection block
Wall plate
Thank you for choosing our product Thank you for choosing our product
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
-4-
Wall plate
TV connection block
Supportable block
Warning
!
.

INSTALLATION GUIDE

Item No.: PSWLE08 Item No.: PSWLE08
TV Size Range: 37 ~65
Maximum Weight Capacity: 60kg/132lbs
VESA: 200x100-800x600
CAUTION
This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.
" "
. .
www pyleaudio com