Contents Overview Control and display elements Your Wireless TV Link Safety Installation Operation Enjoy your Wireless TV Link Use additional features Troubleshooting Information Health and safety Maintenance and service Recycling and disposal Warranty Glossary Page...
Overview Control and display elements A Transmitter 1 On/off switch 2 Power light: > red: standby > green: on > blinking: remote control signalling 3 RECORD SOURCE button 4 Link source indication lights 5 TV1 SOURCE button 6 AUTO light 7 Integrated remote control blaster light 8 TV1 source indication display 9 Antenna...
Your Wireless TV Link You can say good-bye to wires. With your Wireless TV Link you can now wirelessly connect a second TV and choose between four devices to watch on your second Safety • Read the instructions in this manual carefully before you connect, install and use the product.
STANDBY SLV5400 WIRELESS TV LINK TRANSMITTER STANDBY SLV5400 WIRELESS TV LINK TRANSMITTER WIRELESS TV LINK RECEIVER Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Install the remote control blaster cord 1 Switch off the transmitter (A).
2 Switch on the VCR or DVD recorder. SELECT STANDBY 3 Take the remote control of the VCR or DVD recorder with you. SLV5400 WIRELESS TV LINK TRANSMITTER 4 Go to TV2. 5 Switch on TV2. 6 Switch on the receiver (B). WIRELESS TV LINK RECEIVER...
Page 8
STANDBY SLV5400 WIRELESS TV LINK TRANSMITTER TV1 SOURCE Operation 7 Press + or - on the receiver (B) to select the VCR or DVD recorder; or: press 4 on the remote control (C). 8 Select the channel on the VCR or DVD recorder with its remote control.
SELECT SAT/STB DVD PLAYER CONNECT 4-VCR/DVD RECORDER AUDIO Audio Amplifier Be responsible Respect copyrights Operation Use additional features Use VCR/DVD recorder features 1 Select a video source with SELECT. > The signal of the video source is connected to the VCR/DVD recorder.
Troubleshooting Problem • No image or wrong Make sure video sources are connected to the transmitter (A). image on TV1 • Make sure the transmitter (A) is connected to TV1. • Make sure SCART cables are firmly inserted. • Make sure the video source is switched on.
Page 11
Troubleshooting Problem • Interference in the Slightly change the position of the receiver (B) or the transmitter (A). image on TV2 • Change the wireless channel that is used for communication. See page 7. • The receiver (B) is out of range of the transmitter (A).
Information Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image.
Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer.
P.O.Box 80002, 5600 JB Eindhoven, The Netherlands declare under our responsibility that the electrical product: Philips SLV5400 -/00 -/05 ( Tx: SLV5400 -/00-T ; Rx: SLV5400 -/00-R ) (name) to which this declaration relates is in conformity with the following standards: EN 300 220-1 v1.3.1...