Download Print this page
Pyle PSWLE58 Installation Manual

Pyle PSWLE58 Installation Manual

Pyle audio tv mount user manual

Advertisement

Quick Links

Thank you for choosing our product
Thank you for choosing our product
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
-8-
Warning
!
.
INSTALLATION GUIDE
Item No.: PSWLE58
Item No.: PSWLE58
TV Size Range: 23 ~42
Maximum Weight Capacity: 20kg/44lbs
Locking by locking bar on the bottom
CAUTION
This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.
"
"
.
www pyleaudio com
.

Advertisement

loading

Summary of Contents for Pyle PSWLE58

  • Page 1 Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. INSTALLATION GUIDE Item No.: PSWLE58 Item No.: PSWLE58 " "...
  • Page 2 Hardware Kit: Hardware Kit: Description Wall plate Left bracket Right bracket Locking bar Rotating rod ×12 bolt ×16 bolt Description M5× bolt M6×16mm bolt Square washer Long bolt Wall anchor Long bolt washer ° ° 0 14 Wall Wall...
  • Page 3 Part 3-Mounting the flat panel screen Part 3-Mounting the flat panel screen Hook the top of brackets (2,3) onto the top flange of wall plate(1). Then swing the screen down. NOTE: NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment.
  • Page 4 Part 1b-Concrete Wall Mounting Part 1b-Concrete Wall Mounting Level wall plate(1) and use wall as a template to mark four holes. Drill four 3/8 ” (10mm) dia. holes 2 (50mm) deep. Insert four anchors(G) into holes and secure wall plate with four long bolts(F) and four washers(H).Tighten screws firmly.