Download Print this page
Pyle PSWLE57 Installation Manual

Pyle PSWLE57 Installation Manual

Pyle audio tv mount user manual

Advertisement

Quick Links

Thank you for choosing our product
Thank you for choosing our product
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
-8-
Warning
!
.
INSTALLATION GUIDE
Item No.: PSWLE57
Item No.: PSWLE57
TV Size Range: 36
Maximum Weight Capacity: 35kg/77lbs
Locked by safety bolt on the bottom
Balance adjust system is included
CAUTION
This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.
"~
"
55
.
.
www pyleaudio com

Advertisement

loading

Summary of Contents for Pyle PSWLE57

  • Page 1 Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. INSTALLATION GUIDE Item No.: PSWLE57 Item No.: PSWLE57 "~ "...
  • Page 2 Hardware Kit: Hardware Kit: Description Wall plate Left bracket Right bracket Safety bolt Bubble level ×12 bolt ×16 bolt M5× bolt M6× bolt M8×16mm bolt Description M ×36mm bolt M6×36mm bolt M ×36mm bolt Square washer Long bolt Wall anchor Long bolt washer Spacer Part 3-Mounting the flat panel screen...
  • Page 3 Part 2b-Attaching brackets to screen with recessed back Part 2b-Attaching brackets to screen with recessed back Center brackets vertically on back of screen. Select the medium(F or G) or large(H) screws. Attach brackets to screen using four selected screws,four square washers(I) and four spacers(M) at the top and bottom of each bracket. Tighten screws firmly.
  • Page 4 Part 1b-Concrete Wall Mounting Part 1b-Concrete Wall Mounting Level wall plate and use it as a template to mark holes. Drill 3/8 (10mm) dia. ” holes 2 (50mm) deep. Insert anchors(K) into holes and secure wall plate with long bolts(J) and washers(L). Tighten screws firmly. Do not overtighten Concrete Wall Part 2a-Attaching Brackets To Screen With Flat Back Part 2a-Attaching Brackets To Screen With Flat Back...