Step 3: Hanging display
Step 3: Hanging display
Firstly lift the bracket mounted display over the wall mount. And then hook the
brackets over the top of the wall mount. Rotate the display let the bottom of the
brackets hook over the bottom of wall mount, as shown in Fig.3a. Then put safe
bolts into the bottom of the brackets and lock it, as shown in Fig.3b.
Warning:
Warning: Some TV require two people to lift, as we are not responsible for any
personal injury or product damage due to mishandling.
2,3
1
Fig 3a
Thank you for choosing our products
Thank you for choosing our products
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
-8-
4
Fig 3b
Tilt Flat Panel TV Bracket
Multifunctional double deck wall mount
INSTALLATION GUIDE
Item No.:PSW449T
Item No.:PSW449T
Easy installing: Just hang up the display
Safety: locking by spinning bolt on the bottom
Max load capacity:60kg/132lbs
"
"
TV size range: 23 ~36
-
~
Adjustable angle: 5
Inside has balance adjust system
Bulit in leveler system
IMPORTANT: If don't understand about right install ways, please
IMPORTANT:
consult to normal installing specialist.
15
.
.
www pyleaudio com
MADE IN CHINA