Your PYLE PRO STEREO MIXER COMPATIBLE WITH iPod is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphone, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.
Page 3
Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit. Set up the mixer controls like this before you start: CONTROL Power On/Off...
Using Headphones Plug a pair of stereo headphones (not supplied) with a 1/4” jack into the Phones input. Using headphones not only affords you the opportunity to listen privately, but also enables you to monitor the incoming audio sources so you can locate an exact passage or section before mixing it in. It also gives you the opportunity to set up the relative volume level of the upcoming passage before it joins the mix.
Set the switch left to deactivate the reverse control. Using the USB 1 and 2 Allows you to use your PPD-MXi as a dock for your iPods. Using a standard Power A-to-B type USB cable, connect the USB...
Care and Maintenance Your Pyle Pro Mixer is an example of superior design and craftsmanship. The following suggestions will help you care for your mixer so you can enjoy years of use: • Keep the mixer dry. If it gets wet, wipe immediately. •...
Need help?
Do you have a question about the PPD-MXi and is the answer not in the manual?
Questions and answers