Installation - Sony MEX-N4200BT Operating Instructions Manual

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar  and the bracket  from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket ,
then pull up the unit to separate.


Face the hook inwards.
Note
Before installing this unit, remove the screw and
box on the back of the unit. Do not use the previous
parts you removed when installing the unit.
Screw
Box
Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 38).
1
Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2
Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
in).
182 mm (7 1 /
4
1 / in)
8
Catch

37
in)
GB