4. It is now time to assemble the insert.
Remove the box and the bottom plate from the
front-door, open the door/doors max and unscrew
the four bolts (see ill). Carefully pull the front towards
you. (App weight of front and door mod 2001, 35 kg)
5. Put the insert in place (so that it touches the smoke
oulet pipe) and adjust the insert to a level position with
the adjustable feet. The rear two feet are adjusted
from below the insert.
Tip! Put a magnetic spirit-level on the grinded surface
on the inside of the door. This is very important to en-
able the automatic closing and locking of the door.
Grab the smoke outlet pipe by the protective iron
screws.
Once again, check that the insert is level.
-
front of the bottom plate.
- 7 -