Download  Print this page

Pyle Pro PAH1280 Owner's Manual

Pah series speaker
Hide thumbs
   

Advertisement

Advertisement

Table of Contents
loading

  Related Manuals for Pyle Pro PAH1280

  Summary of Contents for Pyle Pro PAH1280

  • Page 2: Maintenance And Safety

    Thank you for purchasing this Pyle Pro PAH series speaker The loudspeaker is designed to provide you years of high performance in any application that you require. Please read this manual carefully to fully maximize the performance of the speaker.
  • Page 3: Amplifier Requirements

    Thus you can use one amplifier channel to power multiple speakers. Make certain that the wires you are using are at least 12 gauge unshielded speaker cable (the lower the number, the thicker the wire). Do not use shielded “instrument” cables. Hooking speakers up in parallel decreases the overall impedance, placing a greater load on the amplifier.
  • Page 4: Operation

    PAH series speaker. While it is true that an amplifier with a higher power rating can damage the drivers, under- powering can be even more dangerous. When an amplifier is overdriven and starts distorting, it generates transient frequencies that are much louder than the program material.
  • Page 5: Troubleshooting

    Distorted Sound: Check if the amplifier is overdriven. If it is, you will have to turn the level down. Make sure you are not exceeding the RMS rating of your speaker. ! )* - ! ( * ! ' * % &...
  • Page 6 Typical Setup Parallel Setup...
  • Page 7: Recommended Accessories

    Recommended Accessories " " # $ % & ) & " " & % & ) & " " " Same as above 15ft % & ) & " " " & Check out these and other accessories at www.pyleaudio.com ) &...

This manual is also suitable for:

Pah1580Pah1580