Service And Adjustments - Craftsman 944.364780 Owner's Manual

675 series briggs & stratton engine power-propelled
Table of Contents

Advertisement

WARNING: To avoid serious injury,
before performing any service and
adjustments:
1. Release control bar and stop engine.
2. Make sure the blade and all moving
parts have completely stopped.
3. Disconnect spark plug wire from spark
plug and place wire where it cannot
come in contact with plug.
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See "TO ADJUST CUTTING HEIGHT" in
the Operation sec tion of this manual.
REAR DEFLECTOR
The rear deflector, attached between the
rear wheels of your mower, is provided to
minimize the possibility that objects will
be thrown out of the rear of the mower
into the operator mowing position. If the
deflector becomes dam aged, it should be
replaced.
DRIVE BELT
If your mower does not operate properly
due to suspected drive belt problems,
take your mower to a Sears or other
qualified service center for repair and/or
ad just ment.

SERVICE AND ADJUSTMENTS

TO ADJUST HANDLE
The upper handle may be adjusted to
three (3) different height positions.
1. Move operator presence control bar
forward to unlock the handle.
2. Lift handle to desired adjustment posi-
tion.
ENGINE
ENGINE SPEED
Your engine speed has been factory set.
CARBURETOR
Your carburetor is not adjustable.
IMPORTANT: Never tamper with the
engine governor, which is factory set
for proper engine speed. Over speed-
ing the engine above the factory high
speed setting can be dangerous. If you
think the engine-governed high speed
needs adjusting, contact a Sears or other
qualified service center, which has proper
equip ment and ex pe ri ence to make any
nec es sary adjustments.
17
Operator presence
control bar
(MOVE FORWARD
TO UNLOCK)
Handle

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents