Page 1
ASSEMBLY INSTRUCTIONS for Full Bed Conversion Kit HAMPTON 4 IN 1 CONVERTIBLE CRIB Model #43088 "RECOMMENDATION: We recommend the use of a Bunkie Board or box spring under the mattress for this full bed. 30-43088-V-01 1 of 4...
(F) Allen key (2 pcs) (length may vary) (E) Nut 3/4" (20mm) (2 pcs) Do not fully tighten all bolts until all parts are in place. (please add an extra 1/2 revolution to the bolts when using spring washer after tightening) 30-43088-V-01 2 of 4...
Page 3
A. Rail (2 pcs) STEP 1.1 STEP 1.2 STEP 1.1 Place Headboard in vertical position and then hook rails (A) to Headboard. STEP 1.2 Place Footboard in vertical position and then hook rails (A) to Footboard 30-43088-V-01 3 of 4...
Page 4
- Insert Allenbolt 1" (25 mm) (C), through the top hole in the headboard from the inside and connect with nut 3/4" (20 mm) (E). Tignten all bolts and nuts with allen key (F). Assembly complete. Thank you! 30-43088-V-01 4 of 4...
Need help?
Do you have a question about the 43088 and is the answer not in the manual?
Questions and answers