Download  Print this page

Pyle Pro PYLE PylePro PDWM2200 User Manual

Two channels vhf wireless microphone
Hide thumbs
   

Advertisement

PDWM2700
TWO CHANNELS
VHF WIRELESS MICROPHONE
TRANSMITTER
USER'S MANUAL

Advertisement

Table of Contents
loading

  Related Manuals for Pyle Pro PYLE PylePro PDWM2200

  Summary of Contents for Pyle Pro PYLE PylePro PDWM2200

  • Page 1 PDWM2700 TWO CHANNELS VHF WIRELESS MICROPHONE TRANSMITTER USER'S MANUAL...
  • Page 2 7. Only use the system with the supplied components, do not attempt to use with any other mains power supply adapter or microphone. 8. If the microphone is not going to be used for a time, remove the battery to prevent leakage. In the event of electrolyte leakage inside the battery compartment, carefully remove using a damp cloth.
  • Page 3: Handheld Microphone

    3. Move power switch to center to mute the microphone. 4. If the microphone is not going to be used for a long period of time, please take out the battery to prevent damage by battery leakage.
  • Page 4: Specifications

    SPECIFICATIONS A. Overall system 1. Oscillation mode: Quartz controlled 2. Carrier Frequency Range VHF160~270MHz 3. Frequency Stability: +/-0.005% 4. Max Deviation: +/-56KHz with level limiting 5. Dynamic Range: >110dB 6. S/N Ratio: >100dB 7. T. H. D: <0.5dB 8. Frequency Response 60Hz-18KHz 9.
  • Page 5: Installation

    5. When the transmitter is not going to be used for a long period of time, please take out the battery from transmitter. Note that switching the microphone on and off can cause interference that will be heard if the microphone volume level of the amplifier system is still set high INSTALLATION To connect the wireless microphone to your amplifier system: Refer to the installation diagram below.

This manual is also suitable for:

Pdwm2200