Pyle Pro PDWM 2250 User Manual

19" Rack Mount Dual VHF wireless
Rechargeable Hand-Held Microphone System
Function
Front Panel
(1) (5)LCD:when power is on, it becomes green which can
show FREQ (receiving frequency of the device);OO-30 (rate
of sound volume).LineAl8 (channel Aor 8);
T
(radio fre-
quency indicator) which shows the level of the signal when
the microphone is on."
»))) "
(acoustical frequency level in-
dicator) it waves with the sound of microphone, from
Od8-35d8 to
"iiiiiii"
(2) (6)press button(SET)to set the functions of the device;
for the volume, press the button, the code number(OO-32)
flashes on the LCD, push the "L,"or"\l"button to choose
the suitable value of the sound, then push the button again,
and the value on the LCD stops flashing, setting is completed.
(3) (7)Volume control key"-"; to be used together with the set
button to decrease the sound, less value lower sound.
(4) (8)Volume control key "+"; to be used together with the
set button to increase the sound, bigger value, lower sound .
(9)power button press this button, the electric power will be
on and the receiver stats to work and the display panel lights.
(1 O)lndicator of charging: put the rechargeable battery into
the battery case , the indicator is on, it will be dark after full
charging.
PDWM 2250 User Manual
Part name (Hand-held microphone)
(1 )headnet (2)indicator
(3)power switch (4 )power case
(5)8attery (6)8attery cover
Operation
1.Please take the following working flow diagram for
reference on using this machine-connect the mix
out of receiver with mic input on the amplifier.
2.Power 11 OV, switch the power, set the volume of
your sound equipment.
3 .Adjust the volume in right sound, make MIC1 and
MIC2 harmony, which will make you enjoying the
sound well.
4.Please plug out the power if you will not use the
machine long time.
www.pyleaudio.com
~~LE®
19" Rack Mount Dual VHF wireless
Rechargeable Hand-Held Microphone System
Function
Front Panel
(1) (5)LCD:when power is on, it becomes green which can
show FREQ (receiving frequency of the device);OO-30 (rate
of sound volume).LineAl8 (channel Aor 8);
T
(radio fre-
quency indicator) which shows the level of the signal when
the microphone is on."
»))) "
(acoustical frequency level in-
dicator) it waves with the sound of microphone, from
Od8-35d8 to
"iiiiiii"
(2) (6)press button(SET)to set the functions of the device;
for the volume, press the button, the code number(OO-32)
flashes on the LCD, push the "L,"or"\l"button to choose
the suitable value of the sound, then push the button again,
and the value on the LCD stops flashing, setting is completed.
(3) (7)Volume control key"-"; to be used together with the set
button to decrease the sound, less value lower sound.
(4) (8)Volume control key "+"; to be used together with the
set button to increase the sound, bigger value, lower sound .
(9)power button press this button, the electric power will be
on and the receiver stats to work and the display panel lights.
(1 O)lndicator of charging: put the rechargeable battery into
the battery case , the indicator is on, it will be dark after full
charging.
PDWM 2250 User Manual
Part name (Hand-held microphone)
(1 )headnet (2)indicator
(3)power switch (4 )power case
(5)8attery (6)8attery cover
Operation
1.Please take the following working flow diagram for
reference on using this machine-connect the mix
out of receiver with mic input on the amplifier.
2.Power 11 OV, switch the power, set the volume of
your sound equipment.
3 .Adjust the volume in right sound, make MIC1 and
MIC2 harmony, which will make you enjoying the
sound well.
4.Please plug out the power if you will not use the
machine long time.
www.pyleaudio.com
~~LE®