Writing To The Remote Head Module; Resetting The Remote Head Module - Mitsubishi Electric RJ72GF15-T2 User Manual

4.5

Writing to the Remote Head Module

Write the parameters to the remote head module.
[Online]  [Write to PLC]
Procedure
• For the operation of the remote head module, the system parameter file and CPU parameter file must be
written. For the operation of the I/O modules and intelligent function modules, the module parameter files
and module extension parameter file must be written as well.
• Use of the [Select Favorites] button enables users to easily select frequently-used items such as "System
Parameter/CPU Parameter". Register items as favorites on the window opened by selecting [Setting] 
[Register Favorites Selection] on the menu bar.
4.6

Resetting the Remote Head Module

Reset the remote head module using the switch located on the front of the remote head module.
Procedure
Operate the switch with your fingers. To prevent the switch from being damaged, do not use any tool such as
a screwdriver.
4 PROCEDURES BEFORE OPERATION
28
4.5 Writing to the Remote Head Module
1.
Select the "System Parameter/CPU Parameter" and "Module
Parameter" on the "Online Data Operation" window.
2.
Click the [Execute] button.
3.
After the write processing completes, click the [Close] button.
1.
Set the switch to the RESET/TEST position for a second or
longer.
2.
Check that the ERROR LED flashes several times and turns off.
3.
Set the switch back to the STOP position.