4.3
Initializing the Remote Head Module
Initialize the remote head module.
[Online] [CPU Memory Operation]
Procedure
4.4
Setting Parameters
Set system parameters and parameters for each module.
When the engineering tool is connected to the actual system
Set parameters by loading an actual system configuration to the Module Configuration window of the engineering tool.
[Navigation window] [Module Configuration]
4 PROCEDURES BEFORE OPERATION
26
4.3 Initializing the Remote Head Module
1.
Select "Data Memory" on the "Memory Management" window,
and click the [Initialization] button.
2.
Select "File Storage Area", and click the [Initialization] button.
3.
After the initialization processing completes, click the [Close]
button.
1.
Open the Module Configuration window, and select [Online]
[Read Module Configuration from PLC] on the menu bar.
2.
Click the [OK] button when the window for adding module labels
of the mounted modules appears. Check that "Module Label: Not
use" is displayed on the window.
3.
The system parameters are automatically set, and the actual
system configuration is displayed on the Module Configuration
window.
4.
Double-click each module (remote head module, I/O module, or
intelligent function module) to display the corresponding module
parameter editor.
5.
Set parameters, and click the [Apply] button to close the window.