1
PART NAMES
This chapter describes the part names of the remote head module.
(1)
(2)
(3)
(6)
(4)
(7)
(5)
(8)
(9)
No.
Name
(1)
RUN LED
(2)
ERR LED
(3)
BUS RUN LED
(10)
(11)
(12)
(13)
(15)
Description
Indicates the operating status of the CPU module and the error level.
● RUN LEDERR LED status
Onoff: Normal operation
Onon: Minor error
Onflashing: Moderate error
Flashing (every 2s)off: Initial processing
Flashing (every 400ms)off: Module communication test in progress or changing module online
Flashing (every 400ms)on: Minor error (Module communication test in progress or changing module
online)
Offon/flashing: Major error
For troubleshooting using LED when an error occurs, refer to the following.
MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's Manual (Application)
Indicates the operating status of the module.
On: RUN state
Off: STOP state
The module will be in the STOP state by the following:
• The switch of the remote head module is set to STOP.
• The master station is in the STOP state. (When the remote head module is connected to the master
*6
station)
• Remote STOP
• A moderate error or major error was detected in the remote head module (except when "Continue" is
selected in "Remote head Module Operation Setting at Error Detection" under "RAS Setting" of "CPU
Parameter").
(14)
1
1 PART NAMES
17