7.2 REMOTE CONTROL UNIT - OTHER BUTTONS ... 8 8. PLAYBACK FUNCTIONS ... 9 8.1 LOADING DISC ... 9 8.2 PLAYING DISC ... 9 8.3 DVD ... 9 8.4 TO DISPLAY THE MENU SCREEN ... 9 8.5 STOPPING THE DISC ... 9 8.6 PAUSING THE DISC ... 10 8.7 SCANNING FORWARD AND BACKWARD ...
1. INSTALLATION GUIDE 1. On a towel or soft cloth, gently place the monitor unit "facedown" on a stable work surface. 2. Locate the pigtail with the DIN connector. 3. Connect the DIN connector to the interface cable provided. 4. Connect the RED wire to the positive (+) battery terminal. 5.
2. FUNCTION KEYS 2.1 FRONT PANEL FUNCTIONS POWER: Press the "POWER" button once, To "POWER ON." Press it again, to "POWER OFF." MENU: Press MENU to Display OSD. Press again to exit MENU. When in sub-menus, press "MENU" to return to the main MENU UP/DN: Use to make item selection in OSD menus and to increase/decrease selection parameters.
12cm/single-sided CD 8cm/single-sided CD 6-1 FRONT PANEL FUNCTIONS DVD discs of packages include the marks shown below. These marks indicate the type of video or audio signals recorded on the disc and the functions that can be used. Mark Meaning Indicates the number of audio tracks.
4. PLAY/PAUSE Button Use this button to play picture or sound or stop temporarily. 5. MENU Button Press this button to display the DVD’s menu screen 6. STOP Button Press this button to stop playback of the picture or sound.
7.2 Remote Control Unit - Other Buttons 1. AUDIO Button Press this button to switch the audio Languages. 2. ANGLE Button Press it to switch the picture’s angle. 3. SUBTITLE Button Press it to switch the program’s subtitle languages. 4. DISPLAY Button Press it to display the disc Information.
8.2 Playing Disc Loading the disc • One of the following messages appears on the LCD: DVD, VCD, CD. • For some discs, playback starts automatically when the disc is close. • When discs for which program memories are set, playback starts automatically in the order.
8.6 PAUSING THE DISC Press the PLAY/PAUSE button. Press the button again to resume playback. 8.7 Scanning Forward And Backward During playback, press the PRE or NEXT button. Reverse direction. Forward direction 8.8 RETURNING TO THE PREVIOUS CHAPTER OR TRACK OF DVDS, VIDEO CDS AND CDS Press the PRE button during playback.
9. VARIOUS LANGUAGE AND SUBTITLE SETTINGS Disc Setting Select "DISC SETTING" by using the " press ‘ENTER’ button to enter the DISC SETTING menu. Disc Setting Menu 10. SETTING THE PARENTAL LOCK LEVEL Select ‘Parental’ by using " / " button on the remote control unit, then press ‘ENTER’...
Press ’RETURN’ to return. Note: Normal playing by PCM mode will provide you a non-compressed music which is preferred when you play CD/DVD disc. DOLBY DIGITAL Setting 11.3 Display Setting Select "DISPLAY SETTING" by using "...
Display Setting Menu 12. ADVANCED FUNCTIONS 12.1 Search For A Specific Scene 1. Press the SEARCH button. 2. Press the numeral button to select specific time or title/chapter. 3. Press the ENTER button and playback starts from the specific chapter number. 12.2 Viewing In Slow Motion DVDs And Video CDs Press the SLOW button during playback, the playback speed becomes 1/2, 1/4, or 1/6 of the normal speed each time you press the SLOW button.
13. CAUTIONS ON USE 13.1 Handing When holding with both hands • Do not use damaged (cracked or warped) discs. • Do not scratch signal surface or let it get dirty. 13.2 Storing discs • Always place discs in their case and store them vertically.
14. TROUBLE SHOOTING Picture Disturbed When A DVD Is Recoded On A VCR Or Played Via A VCR ➔ This player is compatible with analog copy protect type copy guard. Some discs include copy prohibit signals. Such discs will not play properly when played via a VCR when recoded on a VCR.
Need help?
Do you have a question about the DVD and is the answer not in the manual?
Questions and answers