Sony WX-920BT Operating Instructions Manual page 12

E:\4699684111\4699684111WX920BTUC\01GB-WX-920BTUC\030CD.fm
010COV.book Page 12 Wednesday, June 7, 2017 7:11 PM
Selecting channels for SiriusXM
1
Press (browse).
2
Rotate the control dial to select
[CHANNEL], then press it.
3
Rotate the control dial to select the
desired channel, then press it.
To select channels with rapid browse mode
Press and hold  or  of remote commander more
than 2 seconds after [CHANNEL] selected, then
press ENTER.
To select channels from categories
1
Press (browse).
2
Rotate the control dial to select [CATEGORY], then
press it.
3
Rotate the control dial to select the desired
category, then press it.
The channel list appears.
4
Rotate the control dial to select the desired
channel, then press it.
To store channels
1
While receiving the channel that you want to store,
press and hold a number button (1 to 6) until
[MEMORY] appears.
To receive the stored channel, press MODE to select
the Band you want ([SIRIUSXM1], [SIRIUSXM2] or
[SIRIUSXM3]), then press a number button (1 to 6).
(Each Band can store up to 6 channels.)
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [GENERAL]  [PARENTAL]  [LOCK SELECT] 
[LOCK-ON].
3
Enter the passcode by rotating the control dial on
the unit or pressing / on the remote
commander.
To move the entry position, press /
(SEEK –/+) on the unit or / on the remote
commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [GENERAL] 
[PARENTAL]  [LOCK SELEXCT]  [LOCK-OFF].
12
GB
To change the passcode
1
Press MENU and rotate the control dial.
2 Select [GENERAL]  [PARENTAL]  [CODE EDIT].
3
Enter the current passcode on the current passcode
input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Name/Channel Number (Default)  Artist
Name/Channel Number  Song Title/Channel
Number  Content Info/Channel Number 
Category Name/Channel Number  Channel
Name/Clock  Channel Name/Battery Voltage
masterpage: Left
WX-920BT
4-699-684-11(1)