Adjusting The Sound And Frequency Of The Equalizer Preamplifier (Xr-C8220R Only); Changing The Line Output Level (Xr-C8220R Only) - Sony XR-C8220R Operating Instructions Manual

3
Press (5) (n ) or (2) (N ) repeatedly to
select desired setting.
SET UP
Each time you press (5) (n ) or (2) (N ),
the cut-off frequency in the display changes
as follows:
LPF off ˜ LPF 80 Hz ˜ LPF 120 Hz
4
Press (SHIFT).
When the frequency setting is complete, the
display returns to the normal playback
mode.
Adjusting the sound and
frequency of the equalizer
preamplifier
This unit can also control an optional equalizer
preamplifier.
This lets you add some effects to the sound
field of the currently selected source.
For details, refer to the instructions manual
supplied with the equalizer preamplifier.
Note
If you connect the optional digital preamplifier
XDP-210EQ, the voice guide function will not
work.
22
(XR-C8220R only)
Changing the line output
level
(XR-C8220R only)
You can change the line output level if you
hear distortion or other noise.
When the optional equalizer preamplifier is
connected, you can set this function.
1
Press (SHIFT), then press (3) (SET UP)
until "L.out" appears.
2
Press (5) (n ) to select the desired
setting "L.out Hi" or "L.out Lo."
3
Press (SHIFT).