Page 2
Thank you for purchasing this product. Taking time to read these operating instructions carefully before use will acquaint you fully with all its features and help ensure optimum performance. In order to simplify the explanation illustrations may sometimes differ from the originals. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,...
DECK A PLAYBACK ON/STANDBY SWITCH Press button to switch “ON” the unit and press again to switch “OFF” unit into “STANDBY MODE”. If the unit is left unattended for long period, remove the plug from the power socket. CASSETTE HOLDER PEAK LEVEL INDICATOR These indicate the recording level during recording and output level during playback.
Ω LOOP Playback a recorded tape (DECK A or DECK B) Switch on the power of the unit. Press the Stop/Eject button and insert a recorded cassette tape. For CrO2/metal tape, further press the CrO2/metal switch and the light at the indicator will be lit up.
Page 5
Manually level control recording This unit has record level volume to adjust the record level. Usually, the volume has a center click. When it reaches the center click position, the tape can be recorded normally. If the sound source signal is too strong, a red spot will be appeared in the record level indicator. You can adjust the record level volume to left position and vice versa.