Samsung CMD6638 Instruction Manual page 4

9. DC 5V Power Input – Connect the included DC 5V power adaptor to power the receiver and/or
charge the receiver battery (when the receiver is not in the cradle).
10. A/V Out Port (Optional Use) – Connect the included A/V cable to view video from the receiver on a
TV or monitor, or record on a DVD recorder/VCR. Alternatively, use the A/V out port on the receiver
cradle.
NOTE: Using this feature will turn off the LCD screen. The LCD
screen will turn back on when the A/V cable is disconnected.
Button – Press the button to start or stop the lullaby.
11. /
Button – Press the button to play next lullaby.
12.
13. TALK Button – Press down and hold the button to talk back to the
camera currently being displayed on the LCD screen.
14. Power Slide Switch – Slide the switch to ON or OFF position to
switch on/off the receiver.
15. SD Card Slot – Insert SD card to this SD card slot for both video
and audio recording.(not available for this version)
* You must have more than one camera configured on the system
when using the functions that requires more than one camera.
16. Alarm +/-Button – Press to increase or
decrease the volume of the audio alarm.
17. Night Light Button – Press to remotely turn
on/off the night light on the camera (for the camera
currently being displayed on the LCD screen).
When the night light is on, an indication icon will
be displayed on the LCD screen.
18. Antenna Locking Switch – Slide the switch to
unlocking position, the receiver antenna will pop
up. Then you can adjust the antenna to vertical
position for better signal reception.
19. Speaker – Produces the sound transmitted
from the camera(s) *.
3