Download  Print this page

Product Checking And Parts Identification - Mitsubishi Electric FR-D700 Instruction Manual

Hide thumbs

Advertisement

1 OUTLINE
1.1

Product checking and parts identification

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
-
FR
Symbol
Voltage class
Three-phase 200V class
D720
Three-phase 400V class
D740
D720S
Single-phase 200V class
Cooling fan
The cooling fan is removable.
Operation panel
(Refer to page 2)
Voltage/current input switch
(Refer to page 9)
PU connector
(Refer to page 9)
Front cover
Refer to the Instruction
Manual (Applied) for
installation/removal.
Capacity plate
1.5K-EA
Inverter model
• Accessory
· Fan cover fixing screws (M3 × 35mm)
These screws are necessary for compliance with the EU Directive. (Refer to page 42)
Capacity
1.5K to 3.7K
5.5K, 7.5K
-
-
D740
1.5
K
EA
Represents the
inverter capacity [kW]
Serial number
Number
1
2
Control logic switchover jumper
connector
The jumper connector is in the sink
logic (SINK) when shipped from the
factory. Move the jumper connector
to change to the source logic
(LOGIC). Always fit the jumper
connector to the either position.
(
(Applied))
Control circuit terminal block
(Refer to page 10)
Main circuit terminal block
(Refer to page 10)
Combed shaped wiring cover
Refer to the Instruction Manual
(Applied) for installation/removal.
Rating plate
Inverter model
FR-D740-1.5K-EA
Input rating
Output rating
Serial number
Refer to the Instruction Manual
1
1

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: