Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.
Compliance Information FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3
The mark shown to the right is in compliance with the Waste Electri- cal and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Important Safety Instructions 1. DO NOT place objects on top of the device, as objects may scratch the screen. 2. DO NOT expose the device to dirty or dusty environments. 3. DO NOT place the device on an uneven or unstable surface. 4.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum...
Contents Compliance Information............i Important Safety Instructions ...........iii Declaration of RoHS2 Compliance ..........iv Copyright Information .............. v Product Registration ..............v 1. Introduction ................1 1.1 Packing List ..................1 1.2 Product Overview ................1 2. Handwriting on the LCD screen........... 3 2.1 Using the Stylus ................
1. Introduction 1.1 Packing List After unpacking, make sure that all of the following contents are included: Pen Display VGA cable Power cord USB cable Power Adapter Quick Star Guide Pen holder with including Pen tip Driver CD Warranty card*1 (China only) If there is a defect or missing part, please contact the agency where you purchased the product.
Page 9
1.2.2 Rear View ① Stand Caution: Avoid the risk of electric shock. Do not open the shell by yourself. Please contact maintenance personnel if any problems are encountered.
2. Handwriting on the LCD screen 2.1 Using the Stylus Use the stylus in the same way that you would use a regular pen, with a few differences. Use your thumb or index finger to control stylus function button. Pressing the button has the same function as a right-button click on a mouse by default.
2.2 Controlling the Stylus Single Tap: Tapping the screen with the stylus produces the same effect as a left-click on a mouse. Double Tap: By quickly tapping the screen twice produces the same effect as a double left-click on a mouse. Double-click Technique: After positioning the cursor, quickly double-tap the tip of the stylus on the screen, being careful not to move the position of the pen tip position too much.
2.3 Featured Applications Pressure Sensor In the corresponding software, you can control the pen pressure sensitivity, color, thickness and transparency effects of the stylus and handwriting. This allows you to select the custom levels of smoothness, and the precise positioning or random gradient of your written content. To adjust the stylus’...
Choose the pen display you want to adjust, and then correct the mapping function according to your preferences. If you are just using the PD1910 alone (without an attached PC monitor), you will not be prompted to choose a screen.
Page 14
Follow these steps if you are using a display in the vertical (portrait) position together with your pen display. 1. Set the PD1910 to the vertical screen display (Windows OS) setting. 2. For the mapping setting, choose the ‘Rotate’ selection that you want to adjust, and select counterclockwise.
3.2 Pen Settings Most users can use the default settings. However, for customized needs follow the directions below to adjust the pen pressure sensitivity settings. 1. Go to Pen Settings Click on Pen Display > Pen Settings in the Start menu to make the pop-up settings panel appear: 2.
USB1.1 or 2.0 5. Installing the Pen Display Driver After installing the PD1910 driver upon first use, there may be inconsistencies between the position of the on-screen cursor and stylus. To adjust the mapping function, go to Start > Pen Display > Pen Display >...
6. Uninstalling the Pen Display Driver 1. Click Start, and then select Control Panel. 2. In Control Panel, click on Programs > Uninstall a Program > Pen Display. 3. Click Uninstall. 4. Confirm that you want to uninstall the program, and then click OK to perform the uninstallation.
7. Troubleshooting 7.1 Monitor problems Problems Suggested action No picture * Make sure the VGA cable between your PC and Pen Display is well-connected. * Check that the computer is switched on. * Check if your PC is in sleep mode. Tap the keyboard or move the mouse to reactivate the system.
7.2 Interactive Pen Problems Problems Suggested action The pen is no * Try using mouse to double check, if mouse also no function function, please restarting your computer or your application. * Try to reinstall the driver. Pen tip is too * Check whether the pen tip is too short.
Some chemical cleaners have been reported to damage the screen and/or case of the pen display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcoholbased cleaners.
9. Product Specification Electromagnetic Type Electromagnetic resonance Power Supply Battery-less Resolution 5080LPI Pressure Level 2048 Tracking Speed 220PPS Type TFT (Thin Film Transistor), 1440 x 900 LCD, 0.283 mm pixel pitch Display Size Metric: 48.3 cm Imperial: 19” (19” viewable) Color Filter RGB vertical stripe Glass Surface...
Page 22
Storage Temperature -4°F to +140°F (-20°C to +60°C) conditions Humidity 80% (Max), non-condensation Dimensions Physical 441.6 mm (W) x 294 mm (H) x 250.8 mm (D) 17.4” (W) x 11.6” (H) x 9.87” (D) Wall Mount Distance 100 x 100 mm Do not set the graphics card in your computer to exceed these timing mode;...
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ T= 0800-54565 soporte@viewsonic.com...
How long the warranty is effective: ViewSonic Pen Displays are warranted for 1 year for all parts and labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 25
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of...