Download  Print this page

Patient Filter & Patient Filter Cover Replacement - Philips SimplyFlo Service And Technical Reference Manual

Hide thumbs

Advertisement

1097626, V
. 03
ER
7.14 P
F
ATIENT
ILTER
Removal:
1. Remove the Rear Enclosure.
2. Remove the Front Enclosure.
3. Remove the three screws that secure the Patient Filter Cover to the spine assembly.
4. Remove the Patient Filter Cover from the Spine Assembly.
5. Remove and discard the old filter.
Installation: (for item identification, refer to removal instructions above)
1. Install a new patient filter.
2. Install the Patient Filter Cover over the Patient Filter in the spine assembly.
3. Secure the Patient Filter Cover to the spine assembly by tightening the three screws.
4. Install the Front Enclosure.
5. Install the Rear Enclosure.
& P
F
C
ATIENT
ILTER
R
OVER
EPLACEMENT
P
7-27
AGE

Advertisement

Table of Contents

   Also See for Philips SimplyFlo

   Related Manuals for Philips SimplyFlo

This manual is also suitable for:

Simplygo

Comments to this Manuals

Symbols: 0
Latest comments: