Cleaning And Maintenance; Cleaning; Lime Removing Feature (Self-Clean) - Beko BKK 2304 User Manual

5

Cleaning and maintenance

5.1 Cleaning

1. Turn off and unplug the appliance
before each cleaning process.
2. Wait until your iron cools down
completely.
3. Use a slightly damp cloth to clean
the outer surface of the iron. Then
wait until it dries out completely.
4. Wipe the sediments and residues
on the soleplate with a slightly
damp cloth and soft, nonabrasive
liquid cleaner as necessary.
WARNING: When you
finished ironing, unplug
the appliance. Drain
A
the water in the tank.
You can drain the water
in the tank by opening
the refill lid (6) and tilt-
ing the iron to the front.
WARNING: Never
A
use gasoline, solvent
and abrasive cleaning
agents or hard brush to
clean this appliance.
Iron / User Manual
5.2 Lime removing feature
(Self-Clean)
Use the self-clean feature once in
every 2 to 3 weeks. If the water of
your network is very hard (if lime
particles fall down from the base of
the appliance), we recommend you
to use the self-clean function more
frequently.
•
Always unplug your iron.
•
Fill in the water reservoir up to
Max. level.
•
Do not add vinegar etc. and other
lime removing substances into the
water reservoir.
•
Pull the steam setting knob (7)
to left and bring to the steamless
ironing "0" position.
•
Plug in the appliance to a
grounded outlet and bring the
soleplate temperature to maxi-
mum.
•
Hold the iron over the sink and
turn the steam setting and self-
clean knob (7) to the "Self Clean"
position.
19 / 94 EN