Advertisement
1
B
1a
Insert Wooden Pins (B) into the top hole on the Side Rails (3) on both ends. Repeat for other side rail.
!
2
B
D
A
1
2a
To attach the Side Rail (3) to the Legs (1 & 2) simply line up the wooden pins you inserted in Step 1 into
!
the top hole on the flat surface of the legs. Ensure that you have one (1) leg and one (2) leg as shown in
image. Bolt together using the 55mm Allen Head bolt (A) tightening with Allen key (D). Repeat for
other side.
3
Attach the Curved Base Rail (4) to the leg assembly with four
!
55mm Allen Head Bolts (A) as shown. Ensure bolts are
tightened securely. Repeat for other side.
3a
ASSEMBLY INSTRUCTIONS
3
3
1
1
4
A
A
D
3
Note: Angled edge of legs face
outwards as shown with the larger
holes for the cross dowels on the same
3
side facing in.
2
1
3
The pilot
Place legs
holes for the
with the
plastic strap
larger holes
should face
facing
inside.
towards
you.
2
4
4
Advertisement
