Installation - Electrolux EKK6450AO User Manual

There is no spark when
lighting the gas
There is no spark when
lighting the gas
The flame is blow out im-
mediately after ignition
The gas ring burns un-
evenly
The oven does not heat
up
The oven does not heat
up
The oven does not heat
up
The oven does not heat
up
The oven lamp does not
operate
Steam and condensation
settle on the food and in
the oven cavity
The display shows
"12.00"
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

WARNING!
Refer to "Safety information"
chapter.
Problem Possible cause
There is no electrical sup-
ply
Burner cap and crown
are placed uneven
Thermocouple is not
heated sufficient
Burner crown is blocked
with food residues
The oven is not switched
on
The clock is not set
The necessary settings
are not set
The fuse in the fuse box
is released
The oven lamp is defec-
tive
You left the dish in the
oven for too long
A power cut
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
Remedy
Examine the house elec-
trical installation fuse.
Make sure that the burner
cap and crown are in cor-
rect positions.
After lightning the flame,
keep the knob pushed for
approximately 5 seconds.
Make sure that the injec-
tor is not blocked and the
burner crown is clear of
food particles.
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends
Reset the clock
.........................................
.........................................
.........................................
ENGLISH 27