Disposal - Silvercrest SHBS 600 A1 Operating Instructions Manual

Hair & beard clippers
Hide thumbs Also See for SHBS 600 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
__GRA78917_B4.book Seite 11 Mittwoch, 5. September 2012 6:49 18

7. Disposal

The symbol showing a wheelie bin crossed through indicates that
the product requires separate refuse collection in the European Un-
ion. This applies to the product and all accessories marked with this
symbol. Products identified with this symbol may not be discarded
with normal household waste, but must be taken to a collection
point for recycling electric and electronic appliances. Recycling
helps to reduce the consumption of raw materials and protect the
environment.
Packaging
When disposing of the packaging, make sure you comply with the environmen-
tal regulations applicable in your country.
Removing the batteries
This device is operated with two rechargeable nickel-metal-hydride batteries,
which you must remove before disposing of the device.
You must be technically minded to remove the batteries, otherwise there is
the danger of injuring yourself. If you do not have any experience with
tools, you should have the batteries removed by a person who is qualified
to do this.
DANGER from batteries!
Ensure that the batteries are not damaged as you remove it. Fire hazard!
The removed batteries must not be disassembled.
Never short-circuit the batteries. The contacts on the removed batteries must
not be connected by metallic objects. The batteries may overheat and ex-
plode.
Only remove the batteries to dispose of the device. The device is destroyed
by removing the batteries. Never try to operate a disassembled device.
1. Disconnect the device from the mains.
2. Switch on the device and let it run until the batteries are empty.
3. Figure D: remove the shaving head|9 from the device (see "Cleaning and
care" on page 10).
4. Figure F: use a Phillips screwdriver to release the 3 screws on the back of
the device.
5. Figure G: use a screwdriver to lever open the side seam and unfold the
two halves of the housing apart.
GB
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

78917

Table of Contents