Specifications; Access Point Module - Motorola Canopy User Manual

SPECIFICATIONS

ACCESS POINT MODULE

Operating Frequency Range
Access Method
Signaling Rate
Modulation Type
Carrier to Interference (C/I)
Receiver Sensitivity
Operating Range
Transmitter Power
DC Power
Interface
Protocols Used by CANOPY
Protocols Supported by Canopy
Software Upgrade Path
Network Management
Operation Temperature
Weight
Dimensions
AP_CMM2 User Manual
U-NII: 5.25 to 5.35 GHz and 5.725 to 5.825 Ghz
ISM: 5.725 to 5.850 GHz
TDD/TDMA
10 Mbps
High Index BFSK
(Optimized for interference rejection)
3dB nominal
-4
-83dBm 10 BER
Up to 2 miles with integrated antenna in the 5.2
GHz band. Up to 10 miles with passive reflector
in the 5.7 GHz band.
Meets FCC U-NII/ISM and IC LELAN ERP Limit
0.3A @ 24 VDC (7.2 watts)
10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP, DES
Switched Layer 2 Transport with support for all
common Ethernet protocols including IPV6,
NetBIOS, DHCP, IPX, etc.
Remotely downloaded into flash memory
HTTP, TELNET, FTP, SNMP
-40°F to +131ºF (-40°C to +55°C)
1 lb. (.45kg)
11.75" H x 3.4" W x 3.4" D (29.9 cm H x 8.6 cm
W x 8.6 cm D)
Page 48 of 49