Download  Print this page

Philips HDI 4000 Service Manual

Ultrasound system.
Hide thumbs

Advertisement

Table of Contents

About This Manual

Audience
Manual Format
Conventions in
This Manual
This manual supports the field service maintenance and repair of the
HDI® 4000 Ultrasound System. The user of this document is a quali-
fied ultrasound electronics technician who has completed training
classes on the system and its peripherals.
This manual is in Portable Document Format (PDF), for viewing on a
laptop computer with Acrobat Reader. A list of bookmarks functions
as an additional table of contents. Those bookmarks, the table of con-
tents, and cross-references use hypertext links to provide access to
the referenced information.
The following conventions are used in this manual:
Hypertext links are blue.
All procedures are numbered. You must complete steps in the
sequence they are presented to ensure reliable results.
Bulleted lists indicate general information about a function or pro-
cedure. They do not imply a sequential procedure.
Control names and menu items or titles are spelled as they are on
the system, and they appear in bold text.
Symbols appear as they appear on the system.
Scanheads and pencil probes both are referred to as scanheads,
unless the distinction is important.
An English system is assumed.

Advertisement

Table of Contents

   Summary of Contents for Philips HDI 4000

  • Page 1: About This Manual

    About This Manual Audience This manual supports the field service maintenance and repair of the HDI® 4000 Ultrasound System. The user of this document is a quali- fied ultrasound electronics technician who has completed training classes on the system and its peripherals. Manual Format This manual is in Portable Document Format (PDF), for viewing on a laptop computer with Acrobat Reader.
  • Page 2: Service Manual Questions Or Comments

    Various support locations around the world can provide customers with technical assistance Assistance regarding the ultrasound system. Customers should contact the sales office where they pur- chased the system or the nearest Philips Ultrasound office. Office addresses and telephone num- bers are in the system user documentation. Philips Ultrasound P.O.
  • Page 3 Figure 1-2 HDI 4000 Ultrasound System (Philips Colors) ....... . .
  • Page 4 Table 2-1 HDI 4000 System Physical Specifications and Limits ....... .
  • Page 5 Figure 4-1 HDI 4000 System Functional Block Diagram ....... . .
  • Page 6 4730-0037-02 HDI 4000 Field Service Manual Page 6 Contents Industrial PC Motherboard ............... 67 Table 4-2 System Computer Settings .
  • Page 7 4730-0037-02 HDI 4000 Field Service Manual Page 7 Contents Wiring Requirements ................82 Checking the Electrical Power Source .
  • Page 8 To configure the HDI 4000 system for DICOM operations ....... .
  • Page 9 4730-0037-02 HDI 4000 Field Service Manual Page 9 Contents Figure 5-16 Codonics NP-1660 Printer Ethernet Wall Jack Connection Diagram ......114 Figure 5-17 Codonics NP-1660 Printer Point-to-Point Connection Diagram .
  • Page 10 4730-0037-02 HDI 4000 Field Service Manual Page 10 Contents Live 3D Test ................. . 130 CW Static Probe Test .
  • Page 11 4730-0037-02 HDI 4000 Field Service Manual Page 11 Contents General System Cleaning ................142 OEM Peripherals .
  • Page 12 4730-0037-02 HDI 4000 Field Service Manual Page 12 Contents Figure 9-8 Software Options Results ............164 Figure 9-9 Version Check Results .
  • Page 13 4730-0037-02 HDI 4000 Field Service Manual Page 13 Contents Restoring the Ultrasound Images from a Backup Disk ........... . 180 Equipment Required .
  • Page 14 4730-0037-02 HDI 4000 Field Service Manual Page 14 Contents To remove a wheel cap: ..............189 To install a wheel cap: .
  • Page 15 Table 11-1 HDI 4000 Signal Interconnect Cables ........
  • Page 16 Table 12-2 Parts with the Philips Colors ........
  • Page 17 Figure 14-1 HDI 4000 System Parts Locator Map (Front and Rear Ends) ......
  • Page 18 4730-0037-02 HDI 4000 Field Service Manual Page 18 Contents Figure 14-3 Video Monitor Assembly ............255 Figure 14-4 Upper Cart .
  • Page 19 Figure 14-35 HDI 4000 Accessory Kit ........
  • Page 20: Hdi 4000 Field Service Manual

    4730-0037-02 HDI 4000 Field Service Manual Page 20 Contents Table 15-4 Scanhead Doppler Frequencies ............308 Table 15-5 Scanhead Part Numbers .
  • Page 21: General Information

    JPEG or BMP formats. High-density removable media capability is standard, and the system supports compatible ink-jet printers. The HDI 4000 system has an online Help feature. Help displays instructions for use of the HDI 4000 system on-screen, by pressing the ? button on the control panel.
  • Page 22 4730-0037-02 HDI 4000 Field Service Manual Page 22 General Information: System Overview Figure 1-1 HDI 4000 Ultrasound System Pull-out keyboard Figure 1-3...
  • Page 23: Figure 1-2 Hdi 4000 Ultrasound System (philips Colors)

    4730-0037-02 HDI 4000 Field Service Manual Page 23 General Information: System Overview Figure 1-2 HDI 4000 Ultrasound System (Philips Colors)
  • Page 24: Figure 1-3 Control Panel And Pull-out Keyboard

    4730-0037-02 HDI 4000 Field Service Manual Page 24 General Information: System Overview Figure 1-3 Control Panel and Pull-out Keyboard Overlay Figure 1-5...
  • Page 25: Figure 1-4 Control Panel (philips Colors)

    4730-0037-02 HDI 4000 Field Service Manual Page 25 General Information: System Overview Figure 1-4 Control Panel (Philips Colors)
  • Page 26 4730-0037-02 HDI 4000 Field Service Manual Page 26 General Information: System Overview Figure 1-5 Control Panel Labeling (English) SCANHEAD ANGLE VOLUME RECT.L END EXAM REVIEW UTILITY SETUP POWER TH.L COLOR DEPTH FOCAL POS SWEEP STEER DIST. TSI OPT. ZOOM DUAL...
  • Page 27: Applications

    4730-0037-02 HDI 4000 Field Service Manual Page 27 General Information: Applications Applications • Abdominal • Breast • Cardiac • Cardiac TEE • Carotid • Fetal Echo • General • • Intra-Operative • Musculoskeletal • Neo-natal Head • • Pediatric •...
  • Page 28: Features

    4730-0037-02 HDI 4000 Field Service Manual Page 28 General Information: Features Features Electrical Standard • 120 Vac, 60 Hz • 240 Vac, 50 and 60 Hz Languages • English • French • German • Italian • Spanish Scanhead Selection •...
  • Page 29 4730-0037-02 HDI 4000 Field Service Manual Page 29 General Information: Features • Tissue Harmonic Imaging (Cardiac and General applications only for P4-2, P5-3, and MPT7-4 prior to v1.01.00.063 software and L7-4, C5-2, C7-4, 3D5-3, 3D7-4, CL15-7, P4-2, P5-3, P7-4, and MPT7-4 for v1.01.00.063 and higher software) •...
  • Page 30 4730-0037-02 HDI 4000 Field Service Manual Page 30 General Information: Features • Gain control • Dynamic Range control • TGC Value adjustment • Power control • Persistence control • Capture control • Tag control • Histogram utility • 3D controls Image Storage and Retrieval •...
  • Page 31 • M-mode: Time, Slope, Distance. • Pre-measurement calibration of VCR images from HDI 4000 system. • The images stored to Review can be recalled and measured for both distance and area. These measurements cannot be transferred to any of the analysis packages, but the measurements can be recorded to hard copy.
  • Page 32: Scanheads Supported

    (the data is sent to and appears on a computer monitor or prints on a serial printer). On-System User Instructions (Online Help) An online Help feature provides instructions for use of the HDI 4000 system, on-screen, by pressing the ? button on the control panel.
  • Page 33: Peripherals

    4730-0037-02 HDI 4000 Field Service Manual Page 33 General Information: Peripherals • Dual Element Pencil Scanhead D2 CW D5 CW • Volume Scanhead 3D5-3 3D7-4 3D8-5v Peripherals • Panasonic AG-MD835 Video Cassette Recorder (purchase option - Figure 1-6) • Sony UP-895MD Black and White Video Page Printer (purchase option -...
  • Page 34: Safety Requirements

    Main chassis (supports the monitor, control panel, disk drives, scanhead connectors, cable management system, and storage areas) Control panel and pull-out keyboard I/O connection panel Safety HDI 4000 complies with the requirements for the International Electrotechnical Commission (IEC), Canadian Standard Association (CSA), and Underwriters Laboratories (UL). Requirements • IEC 60601-1 •...
  • Page 35: Figure 1-6 Hdi 4000 System Peripherals

    4730-0037-02 HDI 4000 Field Service Manual Page 35 General Information: Safety Requirements Figure 1-6 HDI 4000 System Peripherals - UP-895MD Sony Video Graphic Printer - - UP-21MD Sony Color Video Printer - (Black and White) - AG-MD835 Video Cassette Recorder -...
  • Page 36: Supplies And Accessories

    Page 36 General Information: Supplies and Accessories Supplies and Philips product-specific and general purpose supplies and accessories, including scanhead biopsy guides, are available from CIVCO Medical Instruments at the addresses and numbers below. Sup- Accessories plies and accessories are no longer available from Philips.
  • Page 37: Specifications

    HDI 4000 Field Service Manual Page 37 Specifications: Introduction Specifications Introduction This section summarizes the system specifications for the HDI 4000 Ultrasound System. Scan- head specifications are provided in Section 15, “Scanheads”. System The configuration of the computer platform is as follows: Specifications •...
  • Page 38 4730-0037-02 HDI 4000 Field Service Manual Page 38 Specifications: System Specifications Table 2-1 HDI 4000 System Physical Specifications and Limits (Continued) Parameter Value Storage and Shipping Temperature -25°C to 65°C (-13°F to 149°F) Storage Relative Humidity 20%-95% – 1. Atmospheric pressure (Storage) at 1,060 hPa to 500 hPa (375 795 mmHg).
  • Page 39: Wiring Specification

    4730-0037-02 HDI 4000 Field Service Manual Page 39 Specifications: Wiring Specification Table 2-2 HDI 4000 System Electrical Power Specifications (Continued) Parameter Value Dielectric withstand voltage (DWV) between 4000V isolation transformer primary and secondary DWV between AC mains and exposed conductive...
  • Page 40: Safety

    Safety: Introduction Safety Introduction This section summarizes the safety information for the HDI 4000 Ultrasound System. Safety Please read this information before using or servicing a Philips ultrasound system. It applies to the ultrasound system, scanheads, recording devices, and any optional equipment.
  • Page 41: Mechanical Safety

    The system is heavy, be careful when moving it, especially going up and down stairs. Nor- mally, as many as four adults are required to move the system manually on stairs. • Philips recommends pushing the system, instead of pulling it, and exercising special caution when going up or down ramps. •...
  • Page 42 • Connection of optional devices not supplied by Philips could result in electrical shock. When such optional devices are connected to your ultrasound system, ensure that the total system chassis risk current does not exceed 100 µA for 120 Vac systems and 500 µA for 230 Vac systems.
  • Page 43: Safety Symbols

    4730-0037-02 HDI 4000 Field Service Manual Page 43 Safety: Safety Symbols CAUTIONS • Damage to a peripheral may occur if the OEM power is incorrectly configured and the OEM is connected to an improper power source. • Always turn the power off and wait at least 30 seconds before removing or installing any PCB, module, or component.
  • Page 44 4730-0037-02 HDI 4000 Field Service Manual Page 44 Safety: Safety Symbols Identifies equipotent ground (located next to ground stud on the rear panel) (IEC 417-5021). Identifies high voltage components operating above 1000 Vac or 1500 Vdc. Identifies the point where the system safety ground is fastened to the chassis.
  • Page 45 4730-0037-02 HDI 4000 Field Service Manual Page 45 Safety: Safety Symbols PRINT REMOTE Output ECG Connection Watertight equipment Drip-proof equipment Scanhead Connection Pencil Probe Connection...
  • Page 46: Theory Of Operation

    This platform is combined with ultrasound electronics which include a digital beamformer and ultra- sound software. The HDI 4000 system ultrasound engine is physically and functionally made up of the Industrial PC Motherboard...
  • Page 47: Operating System

    4730-0037-02 HDI 4000 Field Service Manual Page 47 Theory of Operation: Operating System Doppler Processor (CW) PCB, Digital Signal Processors (DSP) PCB, Digital Scan Converter (DSC) PCB, and Video Manager (VM) PCB. Most of the ultrasound signal processing, image pro-...
  • Page 48: Functional Description

    The HDI 4000 system stores the ultrasound images and patient data on the hard drive and can copy that data to the removable media, such as magneto-optical (MO) disks and CD-R/W disks for off-line review.
  • Page 49 4730-0037-02 HDI 4000 Field Service Manual Page 49 Theory of Operation: Functional Description Figure 4-1 HDI 4000 System Functional Block Diagram System monitor & peripherals Probe Select Assembly (PSA) Digital Signal Processor (DSP) PCB Video Manager (VM) PCB Rear Panel I/O PCBs...
  • Page 50: Operating Power

    4730-0037-02 HDI 4000 Field Service Manual Page 50 Theory of Operation: Functional Description Operating The AC power source voltage connects directly to the system power supply, which also com- Power prises the rear panel. The power supply is configured for 115 or 230 Vac operation. (see “Setting...
  • Page 51 4730-0037-02 HDI 4000 Field Service Manual Page 51 Theory of Operation: Functional Description Figure 4-2 Power Supply Schematic Diagram VOLTAGE OUTPUT MAIN TRANS SELECTOR UR-OFF OFF TIME ACOUTPUT1-1 CONTROL IN OVP CN107 OUT OVP MONITOR 110 220 ACOUTPUT1-2 PRINTER In12...
  • Page 52: Probe Select Assembly (psa)

    4730-0037-02 HDI 4000 Field Service Manual Page 52 Theory of Operation: Functional Description Probe Select Figure 4-3 is a simple block diagram of the Probe Select Assembly, which provides the function of Assembly (PSA) a scanhead select module. The PSA is the system interface for three scanheads and the CW pen- cil probe (“General Information”...
  • Page 53 4730-0037-02 HDI 4000 Field Service Manual Page 53 Theory of Operation: Functional Description Figure 4-3 Probe Select Assembly Block Diagram Universal HDI S/H Connector 1 from/to BF Boards Universal Latching Steered CW TX (El. 36-51) HDI S/H Relays from/to Connector 2 Steered CW RX (El.
  • Page 54: Figure 4-4 Cannon Scanhead Connector Pin Grid

    4730-0037-02 HDI 4000 Field Service Manual Page 54 Theory of Operation: Functional Description Figure 4-4 Cannon Scanhead Connector Pin Grid...
  • Page 55: Figure 4-5 Lemo Connector Pin Layout

    4730-0037-02 HDI 4000 Field Service Manual Page 55 Theory of Operation: Functional Description Figure 4-5 Lemo Connector Pin Layout...
  • Page 56: Beamformer (bf0-bf3)

    4730-0037-02 HDI 4000 Field Service Manual Page 56 Theory of Operation: Functional Description Beamformer Figure 4-6 is a functional diagram of the Beamformer module, which is made up of four identical (BF0-BF3) Beamformer PCBs. The Beamformer PCBs are responsible for generating and transmitting pulses to the scanhead elements.
  • Page 57 4730-0037-02 HDI 4000 Field Service Manual Page 57 Theory of Operation: Functional Description Figure 4-6 Beamformer Block Diagram BF Board #3 61.6 MHz Clock Buffer Control & Clock Dual Pulsers Control (16) ASIC Logic Memory RF Data TGC Amplifier Limiter...
  • Page 58: Continuous Wave Doppler Processor (cw)

    4730-0037-02 HDI 4000 Field Service Manual Page 58 Theory of Operation: Functional Description Continuous Figure 4-7 is a functional diagram of the CW PCB.The CW PCB functions that support static Wave Doppler CW and steered CW are: Processor (CW) Static CW •...
  • Page 59 4730-0037-02 HDI 4000 Field Service Manual Page 59 Theory of Operation: Functional Description Figure 4-7 CW Block Diagram Fo Cos Tx EL. Pulser Static Rx EL. Pre-Amp Probe Notch Filter Selector Band (Reject Mixer (Static or Pass Carrier & Driver...
  • Page 60: Digital Signal Processors (dsp)

    4730-0037-02 HDI 4000 Field Service Manual Page 60 Theory of Operation: Functional Description Digital Signal Figure 4-8 is a simple block diagram of the DSP PCB. The RF data from the Beamformer PCBs is Processors sent to the mid-processor via the bypass filter. While the RF data is going through the process of filtering and demodulation, it makes 2D-mode output and in-phase/quadrature-phase (I/Q) data.
  • Page 61 4730-0037-02 HDI 4000 Field Service Manual Page 61 Theory of Operation: Functional Description Figure 4-8 DSP Block Diagram PRE-MID POST-MID 2D mode PROCESSOR (FPGA) (FPGA) from BF to DSC (MGA015A) I, Q CLUTTER FIFO FFT DSP 16 x 2 I/Q Data...
  • Page 62: Digital Scan Converter (dsc)

    4730-0037-02 HDI 4000 Field Service Manual Page 62 Theory of Operation: Functional Description Digital Scan Figure 4-9 is a functional diagram of the DSC PCB. Scan conversion is the process for mapping Converter echo information into frame memory for displaying on the monitor. The DSC receives ECG data processed by the ECG PCB.
  • Page 63 4730-0037-02 HDI 4000 Field Service Manual Page 63 Theory of Operation: Functional Description Figure 4-9 Digital Scan Converter Block Diagram & FPGA 2D mode OutData Color Axial MISC Frame Edge (To VM) from DSP Interpolator Read Buffer InputCTR & Interpo...
  • Page 64: Video Manager (vm)

    4730-0037-02 HDI 4000 Field Service Manual Page 64 Theory of Operation: Functional Description Video Manager The Video Manager provides video and audio development and routing. Figure 4-10 is a simple (VM) block diagram of the video support flow, and Figure 4-11 is a simple block diagram of the audio support flow.
  • Page 65 4730-0037-02 HDI 4000 Field Service Manual Page 65 Theory of Operation: Functional Description Figure 4-10 VM: Video Support Block Diagram Image Grabber Memory Video Scan VCR In Input Converter Decoder (I --> NI) Image Store --> PC FIFO B, C In...
  • Page 66 4730-0037-02 HDI 4000 Field Service Manual Page 66 Theory of Operation: Functional Description Figure 4-11 VM: Audio Support Block Diagram 16bit Serial Programable Doppler Doppler Audio In OP Amp & Low Pass Filter On/Off Converter Low Pass Filter (S3528B) Switch...
  • Page 67: Industrial Pc Motherboard

    4730-0037-02 HDI 4000 Field Service Manual Page 67 Theory of Operation: Functional Description Industrial PC The central processing unit of the system is the Industrial PC Motherboard, a Pentium processor Motherboard CPU that is similar to the motherboard used in a personal computer. The Industrial PC Mother- board determines system functionality and coordinates the overall communication between the user and the system, which includes storing and saving images.
  • Page 68 4730-0037-02 HDI 4000 Field Service Manual Page 68 Theory of Operation: Functional Description Table 4-2 System Computer Settings Setup Menus Options STANDARD CMOS SETUP (Table 4-3) LOAD SETUP DEFAULTS BIOS FEATURES SETUP (Table 4-4) SUPERVISOR PASSWORD CHIP FEATURES SETUP (Table...
  • Page 69 4730-0037-02 HDI 4000 Field Service Manual Page 69 Theory of Operation: Functional Description Table 4-3 STANDARD CMOS SETUP Settings Date (mm:dd:yy): Thu, Dec 27 2001 Time (hh:mm:ss): 15 : 03 : 27 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE...
  • Page 70 4730-0037-02 HDI 4000 Field Service Manual Page 70 Theory of Operation: Functional Description Table 4-4 BIOS FEATURES SETUP Settings Virus Warning : Disabled Video BIOS : Enabled Shadow CPU Internal Cache : Enabled : Disabled C8000-CBFFF External Cache : Enabled...
  • Page 71 4730-0037-02 HDI 4000 Field Service Manual Page 71 Theory of Operation: Functional Description Table 4-5 CHIP FEATURES SETUP Settings Auto Configuration : Enable EDO DRAM Speed Selection : 60 ns EDO CASx# NA Wait State EDO CASx# Wait State SDRAM RAS –to-CAS Delay...
  • Page 72 4730-0037-02 HDI 4000 Field Service Manual Page 72 Theory of Operation: Functional Description Table 4-6 POWER MANAGEMENT SETUP Settings Power Management : Disabled ** Reload Global Time Events ** IRQ[3-7,9-15],NMI PM Control by APM : Yes : Disabled Primary IDE 0...
  • Page 73 4730-0037-02 HDI 4000 Field Service Manual Page 73 Theory of Operation: Functional Description Table 4-7 PNP/PCI CONFIGURATION Settings PnP OS Installed : No Onboard VGA IRQ : Auto Reset Controlled by Data : Disabled PCI DMAC IRQ : Auto Reset Configuration by...
  • Page 74 4730-0037-02 HDI 4000 Field Service Manual Page 74 Theory of Operation: Functional Description Table 4-8 INTEGRATED PERIPHERALS Settings IDE HDD Block Mode : Enabled Onboard FDD Controller :Enabled On-Chip Primary PCI IDE : Enabled Onboard Serial Port1 :3F8/IRQ4 Primary Master PIO...
  • Page 75 4730-0037-02 HDI 4000 Field Service Manual Page 75 Theory of Operation: Functional Description Table 4-9 I/O Device Port Address Map ADDRESS DEVICE 000-01F DMA CONTROLLER#1 020-03F INTERRUPT CPNTROLLER #1 040-05F TIMER 060-06F KEYBOARD CONTROLLER 070-07F REAL TIME CLO 080-08F INTERRUPT CONTROLLER #2...
  • Page 76 4730-0037-02 HDI 4000 Field Service Manual Page 76 Theory of Operation: Functional Description Table 4-9 I/O Device Port Address Map (Continued) ADDRESS DEVICE 3F0-3F7 FLOPPY DISK CONTROLLER 2F8-3FF SERIAL PORT #1(COM1) 2F8-2FF SERIAL PORT #2(COM2) WINBOND I/O Table 4-10 Interrupt Controller NMI Assignments...
  • Page 77: Input/output Panel

    4730-0037-02 HDI 4000 Field Service Manual Page 77 Theory of Operation: Functional Description Table 4-10 Interrupt Controller NMI Assignments (Continued) Assigned to IRQ13 MATH COPROCESSOR IRQ14 PRIMARY IDE CHANNEL IRQ15 SECONDARY IDE CHANNEL Input/Output The I/O Panel at the rear of the system...
  • Page 78: Figure 4-12 Rear I/o Connector Panel

    4730-0037-02 HDI 4000 Field Service Manual Page 78 Theory of Operation: Functional Description Figure 4-12 Rear I/O Connector Panel...
  • Page 79: User Interface

    4730-0037-02 HDI 4000 Field Service Manual Page 79 Theory of Operation: Functional Description User Interface The user interface comprises the controls, indicators, and output devices of the system. The control panel (in conjunction with the monitor displays) is the primary operating interface with the ultrasound system.
  • Page 80 4730-0037-02 HDI 4000 Field Service Manual Page 80 Theory of Operation: Functional Description Figure 4-13 Data Path Grayscale (2D, M, D) Data Audio IRGB Color Data B/W, C, ECG CVID Rear Video Panel Manager Boards CVID Scanhead Audio In Select...
  • Page 81: Installation

    Installation Introduction This section contains pre-installation and installation information for the HDI 4000 system. On-site installation usually consists of uncrating, unpacking, installing the monitor and accesso- ries, checking connections, and powering up the system for a functional check. Read this section completely before starting the installation.
  • Page 82: Checking The Operating Environment

    Wiring Philips recommends that the electrical feeds to the system each be a dedicated line (no other Requirements equipment on the same line) with a third-wire ground. The ground wire shall be an insulated, iso- lated solid copper conductor bonded to the ground bus of the service panel.
  • Page 83 4730-0037-02 HDI 4000 Field Service Manual Page 83 Installation: Pre- Installation Evaluation 2. Verify that the outlet to be used is a dedicated line. a. Have the facility representative open the circuit breaker corresponding to the AC line for the system.
  • Page 84: Checking For Electrostatic Discharge

    4730-0037-02 HDI 4000 Field Service Manual Page 84 Installation: Pre- Installation Evaluation d. Calculate the percentage of voltage loss across the line using this formula Percent line loss = [(A-B)/A] x 100 where A is the voltage at the wall outlet with the system off, and B is the voltage at the wall outlet with the system on.
  • Page 85: System Installation

    RED. If the indicators show RED, the system needs to be inspected and tested to determine if it was damaged in shipment. 3. Report any damage or pilferage to the carrier, the customer, and the Philips traffic depart- ment.
  • Page 86: To Remove The System From The Crate

    4. Carefully remove the monitor from its packaging and set it safely aside. 5. Open any accompanying boxes, locate and unwrap the contents, and set everything safely aside. 6. Properly dispose of the shipping materials. Do not return these materials to Philips.
  • Page 87: Figure 5-1 Shipping Crate Components

    4730-0037-02 HDI 4000 Field Service Manual Page 87 Installation: System Installation Figure 5-1 Shipping Crate Components Carton (2 halves) Plastic strapping Carton top Shipping Ramp crate (assembled) Bolts (2 plcs) Pallet Chock (Place behind system rear wheels)
  • Page 88 4730-0037-02 HDI 4000 Field Service Manual Page 88 Installation: System Installation Figure 5-2 Unpacking the Shipping Crate NOTE The monitor, HDD, and accessory kit cartons are placed inside the shipping crate and shipped with the system. System carton Packing locations within the crate may vary with each system.
  • Page 89: General Inspection

    2. Inspect the video monitor, scanheads, and accessories for damage. 3. Inspect the outside surfaces of the system for damage. 4. Report any damage to the carrier, the customer, and the Philips traffic department. 5. Verify that the system rolls and turns smoothly on its casters.
  • Page 90: Installing The Monitor

    4730-0037-02 HDI 4000 Field Service Manual Page 90 Installation: System Installation Installing the To install the system monitor Monitor 1. Note the location of the monitor aligning slot and pin holes and the four thumbscrew receiv- ing nuts on the bottom of the monitor (Figure 5-3).
  • Page 91 4730-0037-02 HDI 4000 Field Service Manual Page 91 Installation: System Installation Figure 5-3 Monitor Installation Rear panel I/O Signal cable AC In power cable Power supply Monitor arm assembly Thumb screw (4 plcs)
  • Page 92: Installing The Hard Disk Drive (hdd)

    4730-0037-02 HDI 4000 Field Service Manual Page 92 Installation: System Installation Installing the After unpacking the hard disk drive (HDD) from its separate packaging (Figure 14-34), slide it Hard Disk Drive into the drive housing slot at the rear of the system and lock it in place with the key (Figure 5-4).
  • Page 93: Installing The Footswitch

    4730-0037-02 HDI 4000 Field Service Manual Page 93 Installation: System Installation Installing the Connect the footswitch cable to the system footswitch connector on the lower front panel Footswitch (Figure 5-5). The footswitch is packaged with the accessory kit (Figure 14-35).
  • Page 94: Installing The Probe Cable Hangers

    4730-0037-02 HDI 4000 Field Service Manual Page 94 Installation: System Installation Installing the To install the probe cable hangers Probe Cable NOTE The probe cable hangers are removed for shipping so the system will fit properly within Hangers the crate. The cable hangers and screws are packaged with the accessory kit...
  • Page 95: Figure 5-6 Probe Cable Hangers Installation

    4730-0037-02 HDI 4000 Field Service Manual Page 95 Installation: System Installation Figure 5-6 Probe Cable Hangers Installation Probe cable hanger Screws (2 each hanger) Probe cable hanger...
  • Page 96: Setting Up The System

    4730-0037-02 HDI 4000 Field Service Manual Page 96 Installation: System Installation Setting Up the To set up the system System 1. If not already done, verify proper dedicated line wiring and voltage levels (see “Checking the Electrical Power Source” on page 82).
  • Page 97 4730-0037-02 HDI 4000 Field Service Manual Page 97 Installation: System Installation WARNING Do not plug in the system if a wiring fault is discovered. Advise the customer immediately, and proceed only after the fault has been corrected. 3. Connect the system AC power cord.
  • Page 98 4730-0037-02 HDI 4000 Field Service Manual Page 98 Installation: System Installation Figure 5-7 AC Power Selection Always 110V. MONITOR Not affected by the power supply voltage. INPUT (NETZSPANNUNG) Output AUX POWER 10.0A/250V 100V - 120V OUTPUT VOLTAGE SELECTOR ISOLATE OUTPUT voltage selector T5.0AL/250V...
  • Page 99 An MO formatting utility is included in the system software. 7. If the system DICOM features will be used, set up the system for DICOM operation as described in “To configure the HDI 4000 system for DICOM operations” on page 100. 8. Verify system setup.
  • Page 100: To Configure The Hdi 4000 System For Dicom Operations

    (AE Titles are case-sensi- tive and the Host Name must be identical in spelling and syntax to the Host Name entered in the Hosts file). Connect only to the devices that appear on the latest Philips DICOM Compatibility List.
  • Page 101: Figure 5-8 Dicom Settings Screen - No Services (see Also Figure 5-9)

    4730-0037-02 HDI 4000 Field Service Manual Page 101 Installation: System Installation Figure 5-8 DICOM Settings Screen - No Services (see also Figure 5-9)
  • Page 102: Figure 5-9 Dicom Settings Screen With Server Entries

    4730-0037-02 HDI 4000 Field Service Manual Page 102 Installation: System Installation Figure 5-9 DICOM Settings Screen With Server Entries...
  • Page 103: Figure 5-10 Network And Dial-up Connection Selection

    4730-0037-02 HDI 4000 Field Service Manual Page 103 Installation: System Installation Figure 5-10 Network and Dial-up Connection Selection...
  • Page 104 4730-0037-02 HDI 4000 Field Service Manual Page 104 Installation: System Installation e. Double-click Local Area Connection. The Local Area Connection Status dialog box appears. f. Click Properties. The Local Area Connection Properties dialog box appears (Figure 5-11A). g. Select Internet Protocol (TCP/IP) and then click Properties.The Internet Protocol...
  • Page 105: Figure 5-11 Local Area Connection And Tcp/ip Properties

    4730-0037-02 HDI 4000 Field Service Manual Page 105 Installation: System Installation Figure 5-11 Local Area Connection and TCP/IP Properties A - Local Area Connection B - Internet Protocol (TCP/IP) Properties...
  • Page 106: To Add A Storage Server

    • AE Title: The device’s application entity title, as provided by the Network System Administrator. • Station Name: The name for the HDI 4000. • Retry Count: Number of times to try again when transfer failed. • Retry Interval: The time in minutes between trying again.
  • Page 107: Figure 5-12 Storage Server Settings Screen

    4730-0037-02 HDI 4000 Field Service Manual Page 107 Installation: System Installation Figure 5-12 Storage Server Settings Screen...
  • Page 108: To Add A Printer

    4730-0037-02 HDI 4000 Field Service Manual Page 108 Installation: System Installation 5. Enter the Alias, AE Title, IP Address, and Port number of the destination: Alias: Each device on the network requires an alias. The alias is an arbitrary name that describes the device.
  • Page 109: Figure 5-13 Printer Settings Screen

    4730-0037-02 HDI 4000 Field Service Manual Page 109 Installation: System Installation Figure 5-13 Printer Settings Screen...
  • Page 110: To Add A Modality Worklist Server

    4730-0037-02 HDI 4000 Field Service Manual Page 110 Installation: System Installation To add a modality worklist server 1. Press SETUP. The setup menu appears. 2. Select DICOM. The DICOM settings screen appears (Figure 5-8). 3. Click Add. 4. Select WORKLIST from the Services drop-down list. The Modality Worklist server set-...
  • Page 111: Figure 5-14 Modality Worklist Server Settings

    4730-0037-02 HDI 4000 Field Service Manual Page 111 Installation: System Installation Figure 5-14 Modality Worklist Server Settings...
  • Page 112: To Edit Or Delete A Server

    3. Finish installing the Codonics NP-1660 printer as described in the External Codonics NP-1660 Printer Field Installation Instructions (P/N 8055-1767, -02 and up) or the Codonics Printer Installa- tion and Setup Video (P/N WTE-9903), available through Philips Worldwide Sales Training and Education in Bothell.
  • Page 113: Figure 5-15 Codonics Np-1660 Printer Lan Connection Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 113 Installation: System Installation Figure 5-15 Codonics NP-1660 Printer LAN Connection Diagram NP-1660 printer HDI 4000 Power DICOM RJ-45 RJ-45 SCSI-2 2275-0335-01 (straight-through cable) SCSI in Power MO drive...
  • Page 114: Figure 5-16 Codonics Np-1660 Printer Ethernet Wall Jack Connection Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 114 Installation: System Installation Figure 5-16 Codonics NP-1660 Printer Ethernet Wall Jack Connection Diagram Ethernet wall jack Ethernet wall jack Hospital NP-1660 printer HDI 4000 network Power DICOM RJ-45 RJ-45 SCSI-2 2275-0335-01 SCSI in...
  • Page 115: Figure 5-17 Codonics Np-1660 Printer Point-to-point Connection Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 115 Installation: System Installation Figure 5-17 Codonics NP-1660 Printer Point-to-Point Connection Diagram HDI 4000 NP-1660 printer Power DICOM RJ-45 RJ-45 SCSI-2 Cross-over cable (supplied by Codonics) SCSI in Power MO drive...
  • Page 116: Language Settings

    Press and hold Shift and Alt and then F4. b. When the Administrator Mode password prompt appears, enter the appropriate password and press Enter (if you do not know the password, contact your local Philips technical support group). c. Press and hold Shift and then F4.The system display will switch to the operating system desktop screen with the HDI 4000 logo as the background image.
  • Page 117: Presenting The System

    4730-0037-02 HDI 4000 Field Service Manual Page 117 Installation: System Installation d. Click Apply, and then OK. 8. Close the Control Panel folder. 9. Click Start and select Restart or cycle power. Presenting the Do not present the system until you have accomplished the actions described in “Setting Up the...
  • Page 118 4730-0037-02 HDI 4000 Field Service Manual Page 118 Installation: System Installation 8. Describe any peripherals provided with the system and demonstrate how to reload applica- ble consumables. 9. Describe and demonstrate system maintenance procedures to be performed as needed: System cleaning...
  • Page 119: Performance Tests

    This section contains performance tests based on the factory acceptance testing Philips Ultra- sound performs when conducting the HDI 4000 functional audit. Use these tests to verify that a system is operating and performing correctly. Some or all of these tests should be performed as necessary, following installation, upgrade, preventive maintenance, or repair.
  • Page 120: Warnings And Cautions

    “Section 5, “Installation”. Check the equipment for abnormalities or conditions that do not meet Philips standards. Initialization and 1. If not already done, plug the system power cord into a dedicated hospital grade outlet, rated Monitor Tests for at least 15 Amperes.
  • Page 121: Figure 6-1 Power Switch Location

    4730-0037-02 HDI 4000 Field Service Manual Page 121 Performance Tests: Initial Setup Figure 6-1 Power Switch Location Power switch...
  • Page 122: Figure 6-2 System Startup Display

    4730-0037-02 HDI 4000 Field Service Manual Page 122 Performance Tests: Initial Setup Figure 6-2 System Startup display...
  • Page 123: Functional Tests

    4730-0037-02 HDI 4000 Field Service Manual Page 123 Performance Tests: Functional Tests 6. Verify that the system has the correct software level by reading the software version dis- played on the screen during boot-up, or you can check it in system setups.
  • Page 124: General System Confidence Test

    LEDs. If necessary, look up the control function definition in the “Glossary” section of the HDI 4000 System Reference Manual (P/N 4703-0037-xx) or press ? for the system online Help, and search for the control description you need. For v1.01.00.063 software, also see the HDI 4000 Ultrasound System User Information Update (P/N 4xx5-0037-02).
  • Page 125 4730-0037-02 HDI 4000 Field Service Manual Page 125 Performance Tests: Functional Tests 7. Verify that the image appears uniform in both the axial and lateral direction, without any dropouts or intensity variations. 8. Verify that the pins within the structure are clearly differentiated from the surrounding tis- sues.
  • Page 126: D Image Test - Phased Array Scanheads

    4730-0037-02 HDI 4000 Field Service Manual Page 126 Performance Tests: Functional Tests PW Doppler: PWD, ANGLE, Simultaneous, SV Size +, SV Size -,VOLUME, FILTER, SWEEP, BASELINE, SCALE, INVERT PW Doppler + Color or CPA: COLOR or CPA 2D Image Test - 1.
  • Page 127: D Image Test - Linear Array Scanheads

    4730-0037-02 HDI 4000 Field Service Manual Page 127 Performance Tests: Functional Tests 2D: Direction, Application, M Line, Density, Focus +, Focus-, 2D, THI, DEPTH, FOCAL POS, TSI OPT., ZOOM, POWER, TGC, DUAL CPA: Direction, M Line, Density, Maps, CPA, THI, DEPTH, FOCAL POS,...
  • Page 128 4730-0037-02 HDI 4000 Field Service Manual Page 128 Performance Tests: Functional Tests 5. Adjust the 2D and TGC to produce a smooth, uniform 2D image with a minimum of noise. Do not reduce the gain to the point that the echoes in the far field are eliminated.
  • Page 129: Freehand 3d Test

    4730-0037-02 HDI 4000 Field Service Manual Page 129 Performance Tests: Functional Tests 11. Acquire a Doppler image for five minutes. During that time enter PW Doppler, PW Doppler + CPA, and PW Doppler + Color modalities. Exercise the following soft controls across their...
  • Page 130: Live 3d Test

    4730-0037-02 HDI 4000 Field Service Manual Page 130 Performance Tests: Functional Tests 5. Verify that the X, Y, Z, RECT.L, MAG, TH.L labels illuminate and that the CW, PWD, CPA, COLOR, M, and 2D LEDs illuminate. 6. Scan a 2D tissue phantom and then press FREEZE. Verify that a 3D image is captured and displayed in the 3D VIEW screen.
  • Page 131: Ecg Test

    4730-0037-02 HDI 4000 Field Service Manual Page 131 Performance Tests: Functional Tests ECG Test NOTE Conduct the ECG tests only if you have an ECG simulator. 1. Connect the ECG simulator to the system. 2. Set the simulator to 1mV amplitude, 60 BPM rate.
  • Page 132: Peripheral Tests

    4730-0037-02 HDI 4000 Field Service Manual Page 132 Performance Tests: Functional Tests 5. Using STORE, save a number of images. 6. Press END EXAM. 7. Press REVIEW and do the following: a. Review the images. b. Backup the images onto the MO and delete them from the hard drive. Review the images on the MO and verify they were copied intact.
  • Page 133 4730-0037-02 HDI 4000 Field Service Manual Page 133 Performance Tests: Functional Tests 3. If only the B&W printer is installed, press PRINT on the system (otherwise press PRINT on the printer) and verify that the printer makes a print of the system video. Also verify that the print images are spatially correct horizontally and vertically and that they contain all the information being displayed on the system monitor.
  • Page 134 1. Use Review to print exams to a DICOM 3.0-compliant printer such as the Codonics NP-1660. 2. Verify that the system is set up for DICOM operation (“To configure the HDI 4000 system for DICOM operations” on page 100). 3. In the Review, press OPEN to enter the Exam List window.
  • Page 135: Safety Tests

    4730-0037-02 HDI 4000 Field Service Manual Page 135 Performance Tests: Safety Tests Report Printer Function Test Conduct this test if a customer-provided report printer is installed and you want to test the sys- tem report printing function. 1. Enter the Setup menus and select the Epson 860 or 870 printer and 8x11 paper size 2.
  • Page 136: Performance Test Checklist

    4730-0037-02 HDI 4000 Field Service Manual Page 136 Performance Tests: End of Testing Performance “Initialization and Monitor Tests” on page 120........
  • Page 137: Adjustments

    There are no voltage adjustments to make in the field for this system. The procedures in this section should be performed only by qualified technicians who have been trained by Philips to maintain HDI 4000 systems. Warnings and Review “Safety”...
  • Page 138: Totoku Monitor Adjustments

    4730-0037-02 HDI 4000 Field Service Manual Page 138 Adjustments: Totoku Monitor Adjustments Totoku NOTE Once activated, if after a few seconds the on-screen display senses no activity, it will time out. Monitor Adjustments To check or adjust the monitor contrast and brightness settings 1.
  • Page 139 4730-0037-02 HDI 4000 Field Service Manual Page 139 Adjustments: Totoku Monitor Adjustments Figure 7-1 CONTRAST On-Screen Display CONTRAST + 40 Figure 7-2 BRIGHTNESS On-Screen Display BRIGHTNESS + 40...
  • Page 140: Figure 7-3 Main Menu On-screen Display

    4730-0037-02 HDI 4000 Field Service Manual Page 140 Adjustments: Totoku Monitor Adjustments Figure 7-3 MAIN MENU On-Screen Display MAIN MENU EXIT COLOR SIZE/CENTER GEOMETRY UTILITY ENTER:MENU SELECT: +/-...
  • Page 141: Preventive Maintenance

    4730-0037-02 HDI 4000 Field Service Manual Page 141 Preventive Maintenance: Introduction Preventive Maintenance Introduction This section identifies activities supporting the quality assurance audit (QAA) concept that you should perform in accordance with Customer Field Service policy. QAA activities include, but are not necessarily limited to, the following types of concerns: •...
  • Page 142: General System Cleaning

    4730-0037-02 HDI 4000 Field Service Manual Page 142 Preventive Maintenance: General System Cleaning General Clean or replace the system air filter (Figure 14-30) as its condition warrants. System Use a vacuum cleaner, compressed air, or soft-bristle brush to remove any lint and dust from the...
  • Page 143: Other Maintenance

    4730-0037-02 HDI 4000 Field Service Manual Page 143 Preventive Maintenance: Other Maintenance Other For scanhead cleaning and disinfection procedures, refer to Using Disinfectants and Gels, part number 4700-0249-XX. Maintenance Perform other cleaning and inspection procedures as specified by Customer Field Service policy.
  • Page 144: Troubleshooting

    4730-0037-02 HDI 4000 Field Service Manual Page 144 Troubleshooting: Introduction Troubleshooting Introduction The troubleshooting information provided in this section will assist you in determining if a sys- tem is failing, and if so, will help you isolate the cause. Start Here 1.
  • Page 145: Warnings And Cautions

    4730-0037-02 HDI 4000 Field Service Manual Page 145 Troubleshooting: Warnings and Cautions 9. Once the fault has been identified, perform the authorized corrective action needed to repair the failure, and conduct the tests necessary to ensure the system meets an optimum level of performance.
  • Page 146: Failure Symptoms And Solutions

    System displays “boot error” message Table 9-2. System power is on, but no display shows on After power up, HDI 4000 takes approximately one minute to initialize monitor. the software and hardware. Check that the AC and video cables to the monitor are connected.
  • Page 147 4730-0037-02 HDI 4000 Field Service Manual Page 147 Troubleshooting: Failure Symptoms and Solutions Table 9-1 Symptoms and Recommended Action (Continued) Symptom or Condition Recommended Action System power is on, but no display shows on Consider if the lithium CMOS battery on the Industrial PC Card has monitor (cont.)
  • Page 148 4730-0037-02 HDI 4000 Field Service Manual Page 148 Troubleshooting: Failure Symptoms and Solutions Table 9-2 System Boot Errors and Likely Cause Error Most Likely System Boot Failure Error Message Code# Cause Error Code# FILE_NOT_FOUND Software (HDD failure or not seated...
  • Page 149 4730-0037-02 HDI 4000 Field Service Manual Page 149 Troubleshooting: Failure Symptoms and Solutions Table 9-2 System Boot Errors and Likely Cause (Continued) Error Most Likely System Boot Failure Error Message Code# Cause Error Code# CINE_FIFO_EMPTY_FLAG_CHECK_FAIL_IN_GET_COLOR_3DDATA Error Code# VM_READ_ERROR_BW_IMAGE Error Code# VM_READ_ERROR_IN_COLOR_IMAGE...
  • Page 150 4730-0037-02 HDI 4000 Field Service Manual Page 150 Troubleshooting: Failure Symptoms and Solutions Table 9-2 System Boot Errors and Likely Cause (Continued) Error Most Likely System Boot Failure Error Message Code# Cause Error Code# FFT_PM_CHECK_FAIL Error Code# AUD_PM_CHECK_FAIL Error Code# PDSP0_PM_CHECK_FAIL...
  • Page 151 4730-0037-02 HDI 4000 Field Service Manual Page 151 Troubleshooting: Failure Symptoms and Solutions Table 9-2 System Boot Errors and Likely Cause (Continued) Error Most Likely System Boot Failure Error Message Code# Cause Error Code# FPGA_DOWNLOAD_ERROR_DMA Error Code# FPGA_DOWNLOAD_ERROR_POST Error Code# FPGA_DOWNLOAD_ERROR_ZOOM...
  • Page 152 4730-0037-02 HDI 4000 Field Service Manual Page 152 Troubleshooting: Failure Symptoms and Solutions Table 9-2 System Boot Errors and Likely Cause (Continued) Error Most Likely System Boot Failure Error Message Code# Cause Error Code# PDSP3_DSP_ACK_ERROR Error Code# DSC_DSP_ACK_ERROR0 Error Code# DSC_DSP_ACK_ERROR1...
  • Page 153: Checking Fuses

    4730-0037-02 HDI 4000 Field Service Manual Page 153 Troubleshooting: Failure Symptoms and Solutions Checking Fuses 1. Turn the system power off and unplug the power cord. 2. Using a screwdriver, push up the tab of the fuse drawer on the upper side of the appliance...
  • Page 154: Figure 9-1 Protect Circuit Location & Replacement

    4730-0037-02 HDI 4000 Field Service Manual Page 154 Troubleshooting: Failure Symptoms and Solutions Figure 9-1 Protect Circuit Location & Replacement...
  • Page 155: Running The System On-board Diagnostics

    Remote Service diagnostics (Figure 9-3) with expanded features from a PC (refer to HDI 4000 Remote Service Diagnostics User Manual 4730-0049-xx, when released). 3. If you are on a system with 1.01.00.059 or higher software, click Diagnostics and then Diagnostics.
  • Page 156: Figure 9-2 System Diagnostics Access Point

    4730-0037-02 HDI 4000 Field Service Manual Page 156 Troubleshooting: Failure Symptoms and Solutions Figure 9-2 System Diagnostics Access Point v1.00.05.053 (and previous) software v1.00.01.059 (and higher) software...
  • Page 157: Figure 9-3 On-system Or Remote Diagnostics Selection Point

    4730-0037-02 HDI 4000 Field Service Manual Page 157 Troubleshooting: Failure Symptoms and Solutions Figure 9-3 On-System or Remote Diagnostics Selection Point v1.00.05.053 (and previous) software v1.00.01.059 (and higher) software...
  • Page 158: Figure 9-4 System Diagnostics Run-confirm Dialog Box

    4730-0037-02 HDI 4000 Field Service Manual Page 158 Troubleshooting: Failure Symptoms and Solutions Figure 9-4 System Diagnostics Run-Confirm Dialog Box...
  • Page 159: Figure 9-5 System Diagnostics Access-authorization Dialog Box

    4730-0037-02 HDI 4000 Field Service Manual Page 159 Troubleshooting: Failure Symptoms and Solutions Figure 9-5 System Diagnostics Access-Authorization Dialog Box v1.00.05.053 (and previous) software v1.00.01.059 (and higher) software...
  • Page 160: Figure 9-6 Diagnostics Menu

    4730-0037-02 HDI 4000 Field Service Manual Page 160 Troubleshooting: Failure Symptoms and Solutions Figure 9-6 Diagnostics Menu...
  • Page 161 4730-0037-02 HDI 4000 Field Service Manual Page 161 Troubleshooting: Failure Symptoms and Solutions 7. Highlight the test or utility that you want to run and click START. The results of all of the diagnostics you run will accumulate separately in the Results portion of the screen, even if you repeat them.
  • Page 162 4730-0037-02 HDI 4000 Field Service Manual Page 162 Troubleshooting: Failure Symptoms and Solutions 8. Press SAVE (Figure 9-12) to save the displayed results in a file. Select either the system hard disk or MO disk if you are running the diagnostics from the system, or your laptop if you are running them via the serial port.
  • Page 163: Figure 9-7 System Environments Results

    4730-0037-02 HDI 4000 Field Service Manual Page 163 Troubleshooting: Failure Symptoms and Solutions Figure 9-7 System Environments Results...
  • Page 164: Figure 9-8 Software Options Results

    4730-0037-02 HDI 4000 Field Service Manual Page 164 Troubleshooting: Failure Symptoms and Solutions Figure 9-8 Software Options Results...
  • Page 165: Figure 9-9 Version Check Results

    4730-0037-02 HDI 4000 Field Service Manual Page 165 Troubleshooting: Failure Symptoms and Solutions Figure 9-9 Version Check Results...
  • Page 166: Figure 9-10 System Test Results (1 Of 2)

    4730-0037-02 HDI 4000 Field Service Manual Page 166 Troubleshooting: Failure Symptoms and Solutions Figure 9-10 System Test Results (1 of 2)
  • Page 167: Figure 9-11 System Test Results (2 Of 2)

    4730-0037-02 HDI 4000 Field Service Manual Page 167 Troubleshooting: Failure Symptoms and Solutions Figure 9-11 System Test Results (2 of 2)
  • Page 168: Figure 9-12 Save Results

    4730-0037-02 HDI 4000 Field Service Manual Page 168 Troubleshooting: Failure Symptoms and Solutions Figure 9-12 Save Results...
  • Page 169: Checking The Power Supply Voltages

    4730-0037-02 HDI 4000 Field Service Manual Page 169 Troubleshooting: Failure Symptoms and Solutions Checking the NOTE LEDs on rear of power supply that indicate presence of voltages can only be seen with Power Supply rear panel removed (Figure 9-13). (See also, “Power Supply Removal”...
  • Page 170: Figure 9-13 Power Supply Voltage Leds

    4730-0037-02 HDI 4000 Field Service Manual Page 170 Troubleshooting: Failure Symptoms and Solutions Figure 9-13 Power Supply Voltage LEDs ALARM OUTPUT LED DISPLAY +5VA -5VA +12VA -12VA OUTPUT +5VD -5VD ALARM +12VD -12VD +3.3VBF +3.3VD Notes: LEDs and legend are not visible with the system rear cover in place.
  • Page 171: Figure 9-14 System Power Supply Connector Voltage Map

    4730-0037-02 HDI 4000 Field Service Manual Page 171 Troubleshooting: Failure Symptoms and Solutions Figure 9-14 System Power Supply Connector Voltage Map - Right side view of power supply - CN101 CN102 CN103 CN104 CN105 Figure 9-15 Figure 9-16 CN106 -Rear view of power supply -...
  • Page 172 4730-0037-02 HDI 4000 Field Service Manual Page 172 Troubleshooting: Failure Symptoms and Solutions Figure 9-15 Power Supply Connector Voltages (Right Side View) +12V -12V +97V -97V +5VA -5VA HV C +5VA -5VA -12V +12V +5VA -5VA HV power and fan connector (CN101) Beamformer analog connector (CN102) +3.3V...
  • Page 173 4730-0037-02 HDI 4000 Field Service Manual Page 173 Troubleshooting: Failure Symptoms and Solutions Figure 9-16 Power Supply Connector Voltages (Rear View) SW 1 SW 2 SW 1 SW 2 Power switch connector (CN106) Figure 9-14...
  • Page 174: Checking For Emi And Rfi

    5-17). • Correct TCP/IP configuration – The IP addressing, subnet masking, and gateway address for the HDI 4000 and all connected devices must be correct in the Windows setup and in the DICOM device setup screen. • Correct DICOM configuration – The application entity titles (AE Title) and Port number for the HDI 4000 and all connected devices must be correct.
  • Page 175: To Troubleshoot A Dicom Problem

    3. If the physical data path is good, verify the data path to the hub, network, or the printer, as appropriate: a. On the HDI 4000 system, open a Command Prompt and type in the command “ping hostname” (where “hostname” is the name of the device, as listed in the system host table, with which the system is trying to communicate).
  • Page 176: To Test The System Ip Configuration

    9-18. If the ipconfig command shows no information, verify that the TCP/IP data for this system was properly configured (To config- ure the HDI 4000 system for DICOM operations). 4. In the Command Prompt window, ping the IP address of the destination devices and observe...
  • Page 177: Figure 9-17 Opening A Command Prompt Window

    4730-0037-02 HDI 4000 Field Service Manual Page 177 Troubleshooting: DICOM Troubleshooting Figure 9-17 Opening a Command Prompt Window...
  • Page 178: Figure 9-18 Command Prompt Window - Ip Configuration And Ping Tests

    4730-0037-02 HDI 4000 Field Service Manual Page 178 Troubleshooting: DICOM Troubleshooting Figure 9-18 Command Prompt Window - IP Configuration and Ping Tests Command Prompt 1 Command Prompt 2...
  • Page 179: Backing Up The Ultrasound Images

    4730-0037-02 HDI 4000 Field Service Manual Page 179 Troubleshooting: Backing Up the Ultrasound Images Backing Up As described in the following procedure, you can use an MO disk or CD-R/W disk to back up ultrasound images. If it becomes necessary to restore the backed up images to a hard drive, see the Ultra- “Restoring the Ultrasound Images from a Backup Disk”...
  • Page 180: Restoring The Ultrasound Images From A Backup Disk

    4730-0037-02 HDI 4000 Field Service Manual Page 180 Troubleshooting: Restoring the Ultrasound Images from a Backup Disk Restoring the As described in the following procedure, restore the ultrasound images that have been backed up to a MO disk or CD-R/W disk as described in “Backing Up the Ultrasound Images”...
  • Page 181: Disassembly And Re-assembly Notes

    WARNINGS • Dangerous voltages are present when protective covers are removed. Use extreme caution. Any action taken inside the system must be made by a qualified Philips Ultrasound customer service representative. • Do not wear ESD wrist straps grounded to the cart when working inside a system with its power turned on.
  • Page 182: Disassembly For Shipment

    4730-0037-02 HDI 4000 Field Service Manual Page 182 Disassembly and Re-Assembly Notes: Disassembly for Shipment CAUTIONS • To avoid damaging the Sony UP-21 printer, be sure to secure the thermal printing head before transporting as described below. • To avoid system damage, review the information in this section before performing any disas- sembly or re-assembly activity.
  • Page 183: System Panel Removal And Installation

    4730-0037-02 HDI 4000 Field Service Manual Page 183 Disassembly and Re-Assembly Notes: System Panel Removal and Installation System Panel When removing the rubber plugs (Figure 14-6, Figure 14-17, Figure 14-18) for panel screw access, it is important to return each plug to the location and position from which it was Removal and removed.
  • Page 184: Figure 10-1 Beamformer Guide Install Orientation

    4730-0037-02 HDI 4000 Field Service Manual Page 184 Disassembly and Re-Assembly Notes: Front End/PSA Removal and Installation Figure 10-1 Beamformer Guide Install Orientation Beveled edge inside of slot Scanhead Select side of guide BF board side of guide (should face front of system)
  • Page 185: Primary Card Cage Pcbs Removal And Installation

    4730-0037-02 HDI 4000 Field Service Manual Page 185 Disassembly and Re-Assembly Notes: Primary Card Cage PCBs Removal and Installation Primary Card The following hints may prove helpful when removing and installing the front card cage PCBs (Figure 13-3, Figure 14-22).
  • Page 186: Figure 10-2 I/o Panel Pcb Assembly Removal

    4730-0037-02 HDI 4000 Field Service Manual Page 186 Disassembly and Re-Assembly Notes: Primary Card Cage PCBs Removal and Installation the rear I/O panel: three outer screws on the backside (accessed through the rear panel) and one inner screw that secures the assembly to the lower frame (accessible only from the left side...
  • Page 187: Control Panel Removal

    4730-0037-02 HDI 4000 Field Service Manual Page 187 Disassembly and Re-Assembly Notes: Control Panel Removal Control Panel The control panel top (Figure 14-11) is removed by removing eight screws from the bottom (Figure 14-12). Removal ECG/Power The ECG/Power Switch assembly is secured by one retaining screw at the bottom of the assem- (Figure 10-3).
  • Page 188: Figure 10-3 Ecg/power Switch Assembly Removal

    4730-0037-02 HDI 4000 Field Service Manual Page 188 Disassembly and Re-Assembly Notes: Power Supply Removal Figure 10-3 ECG/Power Switch Assembly Removal ECG connector and system power switch Retaining screw (see Figure 14-9 for disassembled view)
  • Page 189: Wheel Cap Removal And Installation

    4730-0037-02 HDI 4000 Field Service Manual Page 189 Disassembly and Re-Assembly Notes: Wheel Cap Removal and Installation Wheel Cap Removal and Installation CAUTION Do not try to pry the wheel caps off. The wheel caps (Figure 14-33) are not “press fit” only; they are also attached with three screws from the backside of the wheel.
  • Page 190: Cabling

    4730-0037-02 HDI 4000 Field Service Manual Page 190 Cabling: Introduction Cabling Introduction This section contains system cable interconnect information. System Figure 11-1 is an overall system cabling diagram. Figure 11-2 is a power distribution diagram. Figure 11-3 through Figure 11-9 are illustrations of the system primary connector assemblies.
  • Page 191: Figure 11-1 System Signal Cable Interconnect Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 191 Cabling: Interconnect Diagrams Figure 11-1 System Signal Cable Interconnect Diagram 2975-0235-01 2975-0235-02 2975-0235-03 2975-0236-01 JP37 JP19 2975-0246-01 module JP31 JP53 2975-0254-01 System monitor JP55 Motor PCB JP46 JP44 JP54 JP57 CBL-432-N/KB JP43...
  • Page 192: Figure 11-2 System Power Cable Distribution Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 192 Cabling: Interconnect Diagrams Figure 11-2 System Power Cable Distribution Diagram System monitor JP37 JP19 2275-0561-01 JP53 module Motor PCB 2975-0261-01 JP31 Part of fan Rear fans JP55 assembly JP46 JP54 2975-0265-01 JP57 JP44...
  • Page 193: Connectors And Cabling Diagrams

    4730-0037-02 HDI 4000 Field Service Manual Page 193 Cabling: Connectors and Cabling Diagrams Connectors and Cabling Diagrams Figure 11-3 Probe (Scanhead) Connection Panel probe connector Linear or convex probe connectors...
  • Page 194: Figure 11-4 Ac Power Connection Panel

    4730-0037-02 HDI 4000 Field Service Manual Page 194 Cabling: Connectors and Cabling Diagrams Figure 11-4 AC Power Connection Panel MONITOR INPUT (NETZSPANNUNG) AUX POWER OUTPUT VOLTAGE SELECTOR 100V - 120V 10.0A/250V ISOLATE OUTPUT 200V - 240V T5.0AL/250V (ISOLIERTER AUSGANG) 120V-3.3A MAX 230V-1.9A MAX...
  • Page 195: Figure 11-5 Rear I/o Connection Panel

    4730-0037-02 HDI 4000 Field Service Manual Page 195 Cabling: Connectors and Cabling Diagrams Figure 11-5 Rear I/O Connection Panel AUDIO AUDIO S-VHS S-VHS PRINTER PRINT REMOTE...
  • Page 196: Figure 11-6 Power Supply Connection Panel (back Side)

    4730-0037-02 HDI 4000 Field Service Manual Page 196 Cabling: Connectors and Cabling Diagrams Figure 11-6 Power Supply Connection Panel (Back Side) CN106...
  • Page 197: Figure 11-7 Power Supply Connection Panel (right Side)

    4730-0037-02 HDI 4000 Field Service Manual Page 197 Cabling: Connectors and Cabling Diagrams Figure 11-7 Power Supply Connection Panel (Right Side) CN101 CN102 CN103 CN104 CN105...
  • Page 198: Figure 11-8 Motherboard Backplane (front View)

    4730-0037-02 HDI 4000 Field Service Manual Page 198 Cabling: Connectors and Cabling Diagrams Figure 11-8 Motherboard Backplane (Front View) JP57...
  • Page 199 4730-0037-02 HDI 4000 Field Service Manual Page 199 Cabling: Connectors and Cabling Diagrams Figure 11-9 Motherboard Backplane (Back View) JP37 JP19 JP53 JP31 JP55 JP46 JP44 JP54 JP57 JP43...
  • Page 200: Figure 11-10 Up-21md Color Printer Cabling Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 200 Cabling: Connectors and Cabling Diagrams Figure 11-10 UP-21MD Color Printer Cabling Diagram 2275-0482-01 3500-1622-01 2975-0252-01...
  • Page 201: Figure 11-11 Cp800e/um Color Printer Cabling Diagram (external Only)

    4730-0037-02 HDI 4000 Field Service Manual Page 201 Cabling: Connectors and Cabling Diagrams Figure 11-11 CP800E/UM Color Printer Cabling Diagram (External Only) 2275-0482-01 3500-1622-01 2975-0252-01...
  • Page 202: Figure 11-12 Up-895md Black And White Printer Cabling Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 202 Cabling: Connectors and Cabling Diagrams Figure 11-12 UP-895MD Black and White Printer Cabling Diagram 2275-0038 2275-0482-01 2100-0504-01...
  • Page 203: Figure 11-13 Ag-md835e/p Vcr Cabling Diagram

    4730-0037-02 HDI 4000 Field Service Manual Page 203 Cabling: Connectors and Cabling Diagrams Figure 11-13 AG-MD835E/P VCR Cabling Diagram 2275-0482-01 146126 154899 154899 146126 154510...
  • Page 204: Figure 11-14 Ground Cable Location (2275-0516-01)

    4730-0037-02 HDI 4000 Field Service Manual Page 204 Cabling: Connectors and Cabling Diagrams Figure 11-14 Ground Cable Location (2275-0516-01) Green ground cable -System cart, left side - -Keyboard -...
  • Page 205: Part Number Tables

    4730-0037-02 HDI 4000 Field Service Manual Page 205 Cabling: Part Number Tables Part Number Tables Table 11-1 HDI 4000 Signal Interconnect Cables Cable Description Part Number (See Figure 11-1 unless otherwise noted) Notes/Reference 2975-0235-01 Cable Assy, Back Plane, Motor WH-432-SIG-11-0...
  • Page 206 4730-0037-02 HDI 4000 Field Service Manual Page 206 Cabling: Part Number Tables Table 11-1 HDI 4000 Signal Interconnect Cables (Continued) Cable Description Part Number (See Figure 11-1 unless otherwise noted) Notes/Reference 2275-0516-01 Cable, Ground (Part of accessory kit) CBL-GROUND-NEW (See...
  • Page 207 Figure 11-13) Notes/Reference Color Video Printer Cables 3500-1622-01 Cable Assy, Color Printer Remote 2975-0252-01 Cable Assy, E106261, 4 Color, HDI 4000 (Part of accessory kit) CBL-2990-E106261-C (See Figure 14-35) No Philips P/N Cable Assy, Printer Option (Part of accessory kit)
  • Page 208: Oem Peripheral Settings

    4730-0037-02 HDI 4000 Field Service Manual Page 208 Cabling: OEM Peripheral Settings Table 11-3 Peripheral Cables (Continued) Cable Description Part Number (See Figure 11-10 through Figure 11-13) Notes/Reference Black-and-White Video (Image) Printer Cables 2100-0504-01 Cable Assy, Remote Control, Sony, RM91...
  • Page 209 4730-0037-02 HDI 4000 Field Service Manual Page 209 Cabling: OEM Peripheral Settings Table 11-4 UP-895 Printer Switch Settings Inside the Paper Tray (The power must be turned on to access the switches inside the paper tray: Press OPEN and remove the paper roll.)
  • Page 210 4730-0037-02 HDI 4000 Field Service Manual Page 210 Cabling: OEM Peripheral Settings Table 11-5 UP-21MD Printer Settings (Continued) HDI 4000 Default Settings Menus and Parameters NTSC Settings PAL Settings Light: Sharpness: Interpol: Save Color: 1 [EXEC] LAY: Memory: Frame Frame...
  • Page 211 4730-0037-02 HDI 4000 Field Service Manual Page 211 Cabling: OEM Peripheral Settings Table 11-5 UP-21MD Printer Settings (Continued) HDI 4000 Default Settings Menus and Parameters NTSC Settings PAL Settings Window: H Start: -24 Dots 40 Dots V Start: -8 Dots...
  • Page 212 4730-0037-02 HDI 4000 Field Service Manual Page 212 Cabling: OEM Peripheral Settings Table 11-5 UP-21MD Printer Settings (Continued) HDI 4000 Default Settings Menus and Parameters NTSC Settings PAL Settings Function: Auto Live: Immed. Cap.: RM2 Func.: C&Print C&Print Clear: Color Balance:...
  • Page 213 4730-0037-02 HDI 4000 Field Service Manual Page 213 Cabling: OEM Peripheral Settings Table 11-5 UP-21MD Printer Settings (Continued) HDI 4000 Default Settings Menus and Parameters NTSC Settings PAL Settings OUT: Display: RBN Remain: Source: Sync on G: Moni C–R: Moni M–G: Moni Y–B:...
  • Page 214 4730-0037-02 HDI 4000 Field Service Manual Page 214 Cabling: OEM Peripheral Settings Table 11-6 CP800 Main Menu Control Settings Menus and Parameters HDI 4000 Default Settings COLOR ADJ 7 or User's preference CONT 5 or User's preference R-SUB G-SUB B-SUB...
  • Page 215 4730-0037-02 HDI 4000 Field Service Manual Page 215 Cabling: OEM Peripheral Settings Table 11-6 CP800 Main Menu Control Settings (Continued) Menus and Parameters HDI 4000 Default Settings PRINT MODE GRAD NORMAL GAMMA ADJ NORMAL MIRROR COMMENT [>] SIZE/TIMING H-POSI H-START...
  • Page 216 4730-0037-02 HDI 4000 Field Service Manual Page 216 Cabling: OEM Peripheral Settings Table 11-7 CP800 Printer Service Menu Parameter Settings Menus and Parameters HDI 4000 Default Settings KEY SET KEY LOCK MEM & PRN MEM & STOP MEM & MONI PRN &...
  • Page 217 4730-0037-02 HDI 4000 Field Service Manual Page 217 Cabling: OEM Peripheral Settings Table 11-7 CP800 Printer Service Menu Parameter Settings (Continued) Menus and Parameters HDI 4000 Default Settings PRINT SET NORMAL MARGIN CUT AUTO CUT OP MODE SYSTEM SET PAGE INC...
  • Page 218 4730-0037-02 HDI 4000 Field Service Manual Page 218 Cabling: OEM Peripheral Settings Table 11-8 AG-MD835 VCR Switch Settings Switch Settings AUDIO OUT NORM INPUT S-VIDEO S-VHS AUTO MENU MODE LOCK RS-232 Adapter DIP 1 = OFF switch 2 through 4 = ON...
  • Page 219 4730-0037-02 HDI 4000 Field Service Manual Page 219 Cabling: OEM Peripheral Settings Table 11-9 AG-MD835 VCR Configuration Settings Parameters Possible HDI 4000 Menu and Sub-parameters Display Reading Settings Settings VISS 1001:00 Tape Select 1001:01 Record Auto Back 1001:02 Record/ T-120 (NTSC)
  • Page 220 4730-0037-02 HDI 4000 Field Service Manual Page 220 Cabling: OEM Peripheral Settings Table 11-9 AG-MD835 VCR Configuration Settings (Continued) Parameters Possible HDI 4000 Menu and Sub-parameters Display Reading Settings Settings Audio Dub 1008:01 1009:00 CH1, CH 2 1009:01 1009:02 CH 2...
  • Page 221 4730-0037-02 HDI 4000 Field Service Manual Page 221 Cabling: OEM Peripheral Settings Table 11-9 AG-MD835 VCR Configuration Settings (Continued) Parameters Possible HDI 4000 Menu and Sub-parameters Display Reading Settings Settings Parity 3003:00 3003:01 Even 3003:02 None None Baud Rate 3004:00...
  • Page 222: Change History

    Release (v1.00.01.030) System In July 2002, Philips Ultrasound released new baseline software for the HDI 4000 ultrasound sys- tem. The initial software (1.00.01.30) and the pre-release software versions (1.00.00.013 and Baseline 1.00.00.016) were be replaced by software version 1.00.02.035. This release corrected the soft-...
  • Page 223: Changes And Problems Corrected

    There were no hardware changes associated with this release. Description System Philips Ultrasound released new software for production HDI 4000 ultrasound systems in Sep- tember 2002. The previous production software version (1.00.02.35) was replaced by software Software version 1.00.04.049. This release was to support new production system hardware that the pre- Release vious software versions did not.
  • Page 224: Hardware Description

    Description though form, fit, and basic function did not change (for functional notes, refer to the hardware comments on the HDI 4000 Master Compatibility Matrix). Also, new systems started shipping with faster CD-RW drives. This software release was backward-compatible with all of the previous system hardware. At this release, the new Beamformer and Digital Scan Converter PCBs and the new CD-RW drive required version 1.00.04.049 software.
  • Page 225: Changes And Problems Corrected

    This assembly is secured to the lower control panel with the screws from the original scanhead holders. “HDI 4000” system ID labels were available for the first time, which where applied to each side of the system.
  • Page 226: System Software Release (v1.01.00.063)

    This list summarizes the features added or changed in this release, which also supports all fea- Supported tures supported in the previous software version. The HDI 4000 Ultrasound System User Informa- tion Update (P/N 4xx5-0037-02) provides detailed information about each of the following: •...
  • Page 227 • Worklist The service diagnostics portion of the baseline and previous HDI 4000 systems also changed in the 1.5 pre-release (1.01.00.059) and final release (1.01.00.063) software. Software modifications separated the baseline and previous on-board/remote diagnostics feature into two features that can be independently enabled and disabled either long-term or for shorter intervals with time-sensitive passwords.
  • Page 228: Table 12-1 Diagnostics Tests To Ignore

    4730-0037-02 HDI 4000 Field Service Manual Page 228 Change History: System Software Release (v1.01.00.063) • Certain diagnostic tests produce results that you should not rely on. Until further notice, ignore the results of the tests in Table 12-1. Table 12-1...
  • Page 229: Hardware Description

    Motor Controller-to-Backplane ribbon-cable (Figure 11-1) change from 2975-0235-01 to 2975-0235-02. System The HDI 4000 ultrasound system was changed to a Philips color scheme (Figure 1-4) and started shipping (with version 1.01.00.063 software) in either December 2002 or January 2003. The sys- Release tem parts changed to Philips colors are identified in “Hardware Description”...
  • Page 230: Hardware Description

    Hardware The following hardware (Table 12-2) was changed to the Philps colors with this release. Description NOTE Do not mix ATL and Philips system colors. Order replacement hardware like-for-like (Table 14-1). Table 12-2 Parts with the Philips Colors Air Filter, Bottom, Assy...
  • Page 231: Table 12-2 Parts With The Philips Colors

    4730-0037-02 HDI 4000 Field Service Manual Page 231 Change History: System Release (No New Software ) Table 12-2 Parts with the Philips Colors (Continued) Cover, ECG, Power, Assy Cover, Fender, Left Cover, Fender, Right Cover, Keyboard, Alpha, Bottom Cover, Keyboard, Alpha, Top...
  • Page 232 4730-0037-02 HDI 4000 Field Service Manual Page 232 Change History: System Release (No New Software ) Table 12-2 Parts with the Philips Colors (Continued) Monitor Bowl Monitor, Totoku (bezel is different shape also) Pad, Rubber, Top Support, Printer Support, VCR...
  • Page 233: Configuration

    Configuration Introduction This section lists all of the released software version part numbers for the HDI 4000 system, identifies the primary system PCBs, and shows where these PCBs are located in the system. When applicable, additional PCB reference information is provided.
  • Page 234: Pcb Reference Information

    4730-0037-02 HDI 4000 Field Service Manual Page 234 Configuration: PCB Reference Information Table 13-1 System Software CD Part Numbers (Continued) Released Software Dash Version Disk Part No. Number Notes 1.00.04.049 4252-0976 Production release 1.00.05.053 4252-0976 Baseline release 1.01.00.063 4252-0994 Production release...
  • Page 235: Figure 13-1 Scanhead Select Module (probe Select Assembly) Detail

    4730-0037-02 HDI 4000 Field Service Manual Page 235 Configuration: Figures Figures Figure 13-1 Scanhead Select Module (Probe Select Assembly) Detail Card cage Figure 13-2 Figure 13-3 Probe Select Assembly Figure 14-21 Beamformer guide Figure 10-1 Figure 14-22 Front cover...
  • Page 236 Figure 13-3 Motherboard (Backplane) Rear panel Probe Select Figure 13-4 Assembly Figure 13-1 NOTE See the HDI 4000 Master PC Mother Board CW Doppler Proc. Compatibility Matrix for Video Manager Beamformer 0 the part number and com- Digital Scan Converter...
  • Page 237 4730-0037-02 HDI 4000 Field Service Manual Page 237 Configuration: Figures Figure 13-3 Front Card Cage PCB Detail Motor Controller Figure 13-12 PC Mother Board Figure 13-11 Figure 13-10 Motherboard Figure 13-9 (Backplane) Figure 13-5 Figure 13-8 Figure 13-6 Figure 13-7...
  • Page 238: Figure 13-4 Rear I/o Connector Panel Pcb Detail

    4730-0037-02 HDI 4000 Field Service Manual Page 238 Configuration: Figures Figure 13-4 Rear I/O Connector Panel PCB Detail Rear panel (left) Rear panel (middle) Rear panel (right) Figure 13-13...
  • Page 239 4730-0037-02 HDI 4000 Field Service Manual Page 239 Configuration: Figures Figure 13-5 Motherboard (Backplane) PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 240 4730-0037-02 HDI 4000 Field Service Manual Page 240 Configuration: Figures Figure 13-6 CW PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 241 HDI 4000 Field Service Manual Page 241 Configuration: Figures Figure 13-7 Beamformer PCB (BF0, 1, 2, 3) NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 242 4730-0037-02 HDI 4000 Field Service Manual Page 242 Configuration: Figures Figure 13-8 Digital Signal Processor (DSP) PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 243 4730-0037-02 HDI 4000 Field Service Manual Page 243 Configuration: Figures Figure 13-9 Digital Scan Converter (DSC) PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 244 4730-0037-02 HDI 4000 Field Service Manual Page 244 Configuration: Figures Figure 13-10 Video Manager (VM) PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 245 4730-0037-02 HDI 4000 Field Service Manual Page 245 Configuration: Figures Figure 13-11 PC Mother Board NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-3...
  • Page 246: Figure 13-12 Motor Controller Pcb

    4730-0037-02 HDI 4000 Field Service Manual Page 246 Configuration: Figures Figure 13-12 Motor Controller PCB NOTE See the HDI 4000 Master Compatibility Matrix for the part num- ber and compatible software version of system PCBs. Figure 13-3...
  • Page 247: Figure 13-13 Rear Connector Panel Pcbs

    Configuration: Figures Figure 13-13 Rear Connector Panel PCBs Rear panel (left) Rear panel (middle) Rear panel (right) NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs. Figure 13-4...
  • Page 248 4730-0037-02 HDI 4000 Field Service Manual Page 248 Configuration: Figures Figure 13-14 ECG PCB NOTE See the HDI 4000 Master Com- patibility Matrix for the part number and compatible soft- ware version of system PCBs.
  • Page 249: Parts

    Parts Introduction This section lists parts information for the HDI 4000. For replacement part numbers that are dependent upon system features and software versions (primary PCBs and certain hardware assemblies), see the HDI 4000 Master Compatibility Matrix (P/N 9015-0743) .
  • Page 250: How To Find A Part Number

    4730-0037-02 HDI 4000 Field Service Manual Page 250 Parts: How to Find a Part Number How to Find a In this section, part numbers in the exploded view system illustrations (Figure 14-1 through Figure 14-35) point to the system parts. The part numbers in these figures link to the parts table...
  • Page 251 Part Number This column lists the part number for an item. Use this number when ordering parts from Philips Ultrasound. If a table is referenced in this column, the part number is on that table. For example, the part numbers for signal cables are in Table 11-1.
  • Page 252 4730-0037-02 HDI 4000 Field Service Manual Page 252 Parts: How to Find a Part Number Figure Definitions Part Number The part number for each part or subassembly shown in an illustration is a 3500-0000-00 hypertext cross-reference linking to the parts/cable tables containing parts descriptions and addi- tional information.
  • Page 253: Illustrations

    4730-0037-02 HDI 4000 Field Service Manual Page 253 Parts: Illustrations Illustrations Figure 14-1 HDI 4000 System Parts Locator Map (Front and Rear Ends) SYSTEM VIEW Video monitor Figure 14-3 Accessory kit Figure 14-35 Upper cart Figure 14-4 Enclosure covers Figure 14-17...
  • Page 254 4730-0037-02 HDI 4000 Field Service Manual Page 254 Parts: Illustrations Figure 14-2 HDI 4000 System Parts Locator Map (Left and Right Sides) SYSTEM VIEW ECG/Power switch panel Control panel Figure 14-9 Figure 14-10 OEM bay (side) Figure 14-14 Enclosure covers...
  • Page 255: Figure 14-3 Video Monitor Assembly

    4730-0037-02 HDI 4000 Field Service Manual Page 255 Parts: Illustrations Figure 14-3 Video Monitor Assembly HDI 4000 Philips 4000 Video monitor assembly Video monitor assembly 2175-0082-01 2175-0125-02 System...
  • Page 256 4730-0037-02 HDI 4000 Field Service Manual Page 256 Parts: Illustrations Figure 14-4 Upper Cart PARENT VIEW Top assembly Figure 14-6 Monitor support arm Speakers Figure 14-5 Figure 14-7 ECG assembly Disk drive assembly Figure 14-9 (CD and floppy disk) Figure 14-8...
  • Page 257 4730-0037-02 HDI 4000 Field Service Manual Page 257 Parts: Illustrations Figure 14-5 Monitor Support Arm 2975-0296-01 2975-0011-01 2975-0451-01 6030-0280-01 1675-0017-01 2975-0425-01 2975-0294-01 2975-0292-01 1675-0018-01 2975-0291-01 2975-0319-01 2975-0293-01 2975-0295-01 1575-0003-01 2975-0075-01 2975-0290-01 Parent View 2975-0422-01 2975-0288-01 System...
  • Page 258 4730-0037-02 HDI 4000 Field Service Manual Page 258 Parts: Illustrations Figure 14-6 Top Assembly 2975-0384-01 2975-0238-01 2975-0240-01 2975-0445-01 2975-0452-01 2975-0428-01 2975-0277-01 2975-0426-01 2975-0387-01 2975-0444-01 2975-0255-01 2975-0446-01 Parent View System...
  • Page 259: Figure 14-7 Speakers

    4730-0037-02 HDI 4000 Field Service Manual Page 259 Parts: Illustrations Figure 14-7 Speakers 2175-0085-01 Parent View 2175-0084-01 System...
  • Page 260 4730-0037-02 HDI 4000 Field Service Manual Page 260 Parts: Illustrations Figure 14-8 Disk Drive Assemblies (CD and MO) 2175-0054-01 2175-0113-01 2175-0130-01 2175-0055-01 2975-0316-01 Parent View System...
  • Page 261 4730-0037-02 HDI 4000 Field Service Manual Page 261 Parts: Illustrations Figure 14-9 ECG Connector and System Power Switch Assembly 213-P-124A 7575-1875-01 2975-0254-01 2975-0273-01 213-P-131A 2175-0127-01 2975-0145-01 2975-0272-01 2975-0449-01 2975-0236-01 Parent View For ECG removal Figure 10-3 WH-432-PWR-07-0 System...
  • Page 262 4730-0037-02 HDI 4000 Field Service Manual Page 262 Parts: Illustrations Figure 14-10 Control Panel PARENT VIEW Control panel top Figure 14-11 UIF assembly 2175-0050-01 2175-0060-01 2175-0068-01 2175-0069-01 Control panel bottom 2175-0070-01 Figure 14-12 UIF assembly (Philips colors) 2175-0115-01 Keyboard 2175-0117-01...
  • Page 263 4730-0037-02 HDI 4000 Field Service Manual Page 263 Parts: Illustrations Figure 14-11 Control Panel Top 2975-0298-01 2975-0448-01 2975-0297-01 2975-0450-01 2975-0410-01 2975-0298-01 2975-0335-01 3275-0001-01 2975-0440-01 Key/Matrix PCBs (See the HDI 4000 2975-0268-01 Master Compatibility Matrix for part numbers and compatibility.) 2175-0043-01...
  • Page 264 4730-0037-02 HDI 4000 Field Service Manual Page 264 Parts: Illustrations Figure 14-12 Control Panel Bottom 2975-0304-01 1675-0002-01 2975-0416-01 2975-0417-01 1675-0002-01 2975-0301-01 2975-0304-01 2975-0334-01 2975-0415-01 2975-0439-01 2975-0418-01 2975-0300-01 2975-0438-01 Keyboard Parent View Figure 14-13 System 2975-0305-01...
  • Page 265 4730-0037-02 HDI 4000 Field Service Manual Page 265 Parts: Illustrations Figure 14-13 Keyboard (Control Panel) 2975-0302-01 Keyboard assembly 2175-0061-01 2975-0327-01 2175-0063-01 2975-0437-01 2175-0066-01 2175-0067-01 2175-0071-01 Keyboard assembly 2975-0326-01 (Philips colors) 2975-0436-01 2175-0116-01 2175-0118-01 Parent View 2175-0120-01 2175-0122-01 System 2175-0124-01...
  • Page 266: Figure 14-14 Oem Bays

    4730-0037-02 HDI 4000 Field Service Manual Page 266 Parts: Illustrations Figure 14-14 OEM Bays PARENT VIEW VCR OEM bay support Figure 14-16 Printer OEM bay support Figure 14-15 System...
  • Page 267 4730-0037-02 HDI 4000 Field Service Manual Page 267 Parts: Illustrations Figure 14-15 Printer OEM Bay Support 2975-0119-01 2975-0118-01 1675-0021-01 2975-0116-01 2975-0454-01 Parent View System...
  • Page 268 4730-0037-02 HDI 4000 Field Service Manual Page 268 Parts: Illustrations Figure 14-16 VCR OEM Bay Support 1675-0021-01 2975-0115-01 2975-0455-01 Parent View System...
  • Page 269 4730-0037-02 HDI 4000 Field Service Manual Page 269 Parts: Illustrations Figure 14-17 Enclosure Covers PARENT VIEW 2975-0242-01 2975-0442-01 Rear cover Figure 14-18 2975-0333-01 2975-0434-01 2975-0328-01 2975-0441-01 2975-0244-01 2975-0270-01 2975-0443-01 2975-0427-01 2975-0108-01 2975-0433-01 Fender covers Figure 14-19 2975-0323-01 2975-0432-01 System...
  • Page 270 4730-0037-02 HDI 4000 Field Service Manual Page 270 Parts: Illustrations Figure 14-18 Rear Cover 2975-0277-01 2975-0426-01 2975-0276-01 2975-0324-01 2975-0431-01 Parent View System...
  • Page 271 4730-0037-02 HDI 4000 Field Service Manual Page 271 Parts: Illustrations Figure 14-19 Fender Covers 2975-0333-01 2975-0434-01 2975-0325-01 2975-0435-01 Parent View 2975-0147-01 2975-0279-01 2975-0423-01 System 2975-0424-01...
  • Page 272: Figure 14-20 Card Cage

    4730-0037-02 HDI 4000 Field Service Manual Page 272 Parts: Illustrations Figure 14-20 Card Cage PARENT VIEW Front card cage Figure 14-22 Probe Select Assembly Figure 14-21 Rack and rail assembly System 2975-0121-01...
  • Page 273: Figure 14-21 Probe Select Assembly

    4730-0037-02 HDI 4000 Field Service Manual Page 273 Parts: Illustrations Figure 14-21 Probe Select Assembly PCB locations Figure 13-2 Parent View Probe Select Assembly System Figure 13-2...
  • Page 274: Figure 14-22 Card Cage (front)

    4730-0037-02 HDI 4000 Field Service Manual Page 274 Parts: Illustrations Figure 14-22 Card Cage (Front) PCB locations Figure 13-2 2975-0136-01 Parent View System 6030-0337-01 Figure 10-1...
  • Page 275: Figure 14-23 Rear Cart

    4730-0037-02 HDI 4000 Field Service Manual Page 275 Parts: Illustrations Figure 14-23 Rear Cart PARENT VIEW 2175-0048-01 Disk drive assembly (Hard) Figure 14-26 Power supply Figure 14-24 Rear connector panel assembly System Figure 14-25...
  • Page 276 4730-0037-02 HDI 4000 Field Service Manual Page 276 Parts: Illustrations Figure 14-24 Power Supply 2775-0010-01 2775-0011-01 Figure 9-1 2975-0117-01 Parent View Power supply assembly 7575-1873-02 System 7575-2042-02...
  • Page 277 4730-0037-02 HDI 4000 Field Service Manual Page 277 Parts: Illustrations Figure 14-25 Rear Connector Panel Assembly PCB locations Figure 13-2 Parent View Chassis assembly 2975-0256-01 System 2975-0241-01...
  • Page 278: Figure 14-26 Disk Drive Assembly (hard Drive)

    4730-0037-02 HDI 4000 Field Service Manual Page 278 Parts: Illustrations Figure 14-26 Disk Drive Assembly (Hard Drive) 2175-0081-01 Figure 14-34 Parent View System...
  • Page 279 4730-0037-02 HDI 4000 Field Service Manual Page 279 Parts: Illustrations Figure 14-27 Lower Cart PARENT VIEW Rear wheel assembly Figure 14-32 Lower fan assembly Figure 14-29 Front caster assembly Figure 14-31 Footswitch housing connector box Figure 14-28 Air filter assembly...
  • Page 280: Figure 14-28 Footswitch Housing Connector Box

    4730-0037-02 HDI 4000 Field Service Manual Page 280 Parts: Illustrations Figure 14-28 Footswitch Housing Connector Box 2975-0233-01 2975-0114-01 6030-0032-01 Parent View System...
  • Page 281: Figure 14-29 Lower Fan Assembly

    4730-0037-02 HDI 4000 Field Service Manual Page 281 Parts: Illustrations Figure 14-29 Lower Fan Assembly Parent View Lower fan assembly System 2175-0049-01...
  • Page 282 4730-0037-02 HDI 4000 Field Service Manual Page 282 Parts: Illustrations Figure 14-30 Air Filter Assembly Parent View Air filter assembly 2975-0106-01 System 2975-0421-01...
  • Page 283 4730-0037-02 HDI 4000 Field Service Manual Page 283 Parts: Illustrations Figure 14-31 Front Caster Assembly Parent View Caster assembly (5-inch) 2975-0189-01 System 2975-0430-01...
  • Page 284: Figure 14-32 Rear Wheel Assembly

    4730-0037-02 HDI 4000 Field Service Manual Page 284 Parts: Illustrations Figure 14-32 Rear Wheel Assembly Wheel assembly (exploded) Figure 14-33 2975-0198-01 2975-0140-01 Parent View System...
  • Page 285 4730-0037-02 HDI 4000 Field Service Manual Page 285 Parts: Illustrations Figure 14-33 Wheel Assembly (Exploded) 2975-0225-01 2975-0219-01 2975-0429-01 2975-0221-01 2975-0219-01 2975-0429-01 2975-0221-01 Parent View 2975-0225-01 System...
  • Page 286: Figure 14-34 Hard Disk Drive Assembly (shipping Container)

    4730-0037-02 HDI 4000 Field Service Manual Page 286 Parts: Illustrations Figure 14-34 Hard Disk Drive Assembly (Shipping Container) Shipping container Hard drive keys Hard disk drive System 2175-0081-01...
  • Page 287 4730-0037-02 HDI 4000 Field Service Manual Page 287 Parts: Illustrations Figure 14-35 HDI 4000 Accessory Kit 1.3 GB MO disk Windows 2000 certification label 2275-0519-01 6030-0032-01 System cover Scanning gel OEM cables will not be in the kit if installation 2275-0516-01 is required at pre-ship.
  • Page 288: Parts List

    Table 14-1 HDI 4000 System Parts List Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-30 2975-0106-01 Air Filter, Bottom, Assy, HDI 4000 A325-001A Figure 14-30 2975-0421-01 Air Filter, Bottom, Assy, Philips 4000 A325-002A (Philips Colors) Figure 14-5...
  • Page 289 4730-0037-02 HDI 4000 Field Service Manual Page 289 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-19 2975-0279-01 Bumper, Rubber, Side 311-R-159A Figure 14-19 2975-0424-01 Bumper, Rubber, Side, Philips 4000...
  • Page 290 4730-0037-02 HDI 4000 Field Service Manual Page 290 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-33 2975-0429-01 Cap, Wheel, 9-inch, Philips 4000 269-M-037D (Philips Colors) Figure 14-31...
  • Page 291 4730-0037-02 HDI 4000 Field Service Manual Page 291 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-17 2975-0433-01 Cover, Door, Side, Philips 4000 215-M-219-1 (Part of accessory kit)
  • Page 292 4730-0037-02 HDI 4000 Field Service Manual Page 292 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-12 2975-0334-01 Cover, Keyboard, Bottom, HDI 4000 260-D-009A Figure 14-12 2975-0439-01...
  • Page 293 4730-0037-02 HDI 4000 Field Service Manual Page 293 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-6 2975-0445-01 Cover, Upper Assy, Back, Philips 4000 A215-100A (Philips Colors)
  • Page 294 4730-0037-02 HDI 4000 Field Service Manual Page 294 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-5 2975-0291-01 Fixture, Swivel, Limit, SA9900 239-L-008A Figure 14-28 6030-0032-01 Foot switch...
  • Page 295 4730-0037-02 HDI 4000 Field Service Manual Page 295 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-35 2975-0447-01 Hanger, Cable, Philips 4000 255-M-010-1 (Scanhead cable hanger) (Philips Colors)
  • Page 296 4730-0037-02 HDI 4000 Field Service Manual Page 296 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-13 2175-0063-01 Keyboard Assy, Spanish, Medison, OPT-432-AN/ESP HDI 4000 Figure 14-13...
  • Page 297 4730-0037-02 HDI 4000 Field Service Manual Page 297 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-5 2975-0011-01 Monitor Bowl, HDI 1500 1.5 227-M-065A Figure 14-5 2975-0451-01...
  • Page 298 4730-0037-02 HDI 4000 Field Service Manual Page 298 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-11 See the HDI 4000 PCB Assy, Key/Matrix, Left, HDI 4000...
  • Page 299 See the HDI 4000 PCB Assy, PSA, HDI 4000 Figure 14-21 Master Compatibility Matrix for the part Figure 13-2 PCB Assy, Rear Panel, Left, HDI 4000 number and compatible Figure 14-25 software version of Figure 13-2 PCB Assy, Rear Panel, Middle, system PCBs.
  • Page 300 4730-0037-02 HDI 4000 Field Service Manual Page 300 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-7 2175-0085-01 Speaker Assy, Left, HDI 4000 A213-046A Figure 14-7 2175-0084-01...
  • Page 301 4730-0037-02 HDI 4000 Field Service Manual Page 301 Parts: Parts List Table 14-1 HDI 4000 System Parts List (Continued) Located On Part Number Part Description Notes/Ref (Medison P/N) Figure 14-10 2175-0121-01 UIF Assy, German, Philips 4000 A260-064A-GER (Philips Colors) Figure 14-10...
  • Page 302 4730-0037-02 HDI 4000 Field Service Manual Page 302 Parts: Parts List Table 14-2 Peripheral Part Numbers Located On Part Number Part Description Notes/Reference Color Video Printer Figure 1-6 3500-3063-01 Printer, Color, Mitsubishi, CP800UM, 120V NTSC Figure 1-6 3500-3064-01 Printer, Color, Mitsubishi, CP800E, 240V...
  • Page 303: Scanheads

    4730-0037-02 HDI 4000 Field Service Manual Page 303 Scanheads: Introduction Scanheads Introduction This section summarizes scanhead specifications for the HDI 4000 Ultrasound System. Scanhead Specifications Table 15-1 Scanhead Applications Scanhead Application D2 CW CARDIAC D5 CW CARDIAC, VASCULAR 3D5-3 GENERAL, OB, GYN, ABDOMINAL...
  • Page 304 4730-0037-02 HDI 4000 Field Service Manual Page 304 Scanheads: Scanhead Specifications Table 15-1 Scanhead Applications (Continued) Scanhead Application L12-5 GENERAL, VASCULAR, SMALL PARTS, MUSCULOSKELETAL, PEDIATRIC, BREAST MPT7-4 GENERAL, CARDIAC TEE P4-2 GENERAL, CARDIAC, ABDOMINAL, TRANSCRANIAL DOPPLER (TCD), RENAL P5-3 GENERAL, CARDIAC, ABDOMINAL...
  • Page 305 4730-0037-02 HDI 4000 Field Service Manual Page 305 Scanheads: Scanhead Specifications Table 15-2 Scanhead Types, Capabilities, and Advantages (Continued) Type Capabilities Advantages Curved Array C5-2 2D, C, PWD, M, CPA, Freehand Combines the advantages of phased array and linear array...
  • Page 306 4730-0037-02 HDI 4000 Field Service Manual Page 306 Scanheads: Scanhead Specifications Table 15-2 Scanhead Types, Capabilities, and Advantages (Continued) Type Capabilities Advantages Volume Scanhead 3D7-4 2D, C, PWD, M, CPA, Volume Easy to obtain 3D images 3D mode 3D8-5v Dynamic receive focus for optimal lateral resolution...
  • Page 307 4730-0037-02 HDI 4000 Field Service Manual Page 307 Scanheads: Scanhead Specifications Table 15-3 Scanhead Information Number of Operating Doppler Scanhead Name Elements Scanhead Label Frequency Frequency D2 CW Dual Element Pencil Scanhead Table 15-4 2.0 CW D5 CW Dual Element Pencil Scanhead 5.0 CW...
  • Page 308 4730-0037-02 HDI 4000 Field Service Manual Page 308 Scanheads: Scanhead Specifications Table 15-4 Scanhead Doppler Frequencies Scanhead Application Doppler Frequency D2 CW Cardiac 3.080 D5 CW Cardiac 3.080 Vascular 3.080 3D5-3 Abdomen 2.567 General 2.567 Gynecology 2.567 2.567 3D7-4 Abdomen 2.800...
  • Page 309 4730-0037-02 HDI 4000 Field Service Manual Page 309 Scanheads: Scanhead Specifications Table 15-4 Scanhead Doppler Frequencies (Continued) Scanhead Application Doppler Frequency C7-4 Abdomen 3.624 Fetal Heart 3.624 General 3.624 Gynecology 3.624 3.624 Renal 4.107 C8-4v General 5.133 Gynecology 5.133 5.133...
  • Page 310 4730-0037-02 HDI 4000 Field Service Manual Page 310 Scanheads: Scanhead Specifications Table 15-4 Scanhead Doppler Frequencies (Continued) Scanhead Application Doppler Frequency CL15-7 General 6.160 Intra Operative 6.160 Musculoskeletal 6.160 Small Parts 6.160 Vascular 6.160 L7-4 Carotid 4.738 General 4.738 Musculoskeletal 4.107...
  • Page 311 4730-0037-02 HDI 4000 Field Service Manual Page 311 Scanheads: Scanhead Specifications Table 15-4 Scanhead Doppler Frequencies (Continued) Scanhead Application Doppler Frequency L12-5 50 mm Breast 5.600 General 5.600 Musculoskeletal 5.600 Pediatric 5.600 Small Parts 5.600 Vascular 5.600 MPT7-4 Cardiac Tee 3.850...
  • Page 312 4730-0037-02 HDI 4000 Field Service Manual Page 312 Scanheads: Scanhead Specifications Table 15-4 Scanhead Doppler Frequencies (Continued) Scanhead Application Doppler Frequency P5-3 Abdomen 2.800 Cardiac 2.800 General 2.800 Abdomen CW 2.800 Cardiac CW 2.800 General CW 2.800 P7-4 General 3.850 Neonatal 3.850...
  • Page 313 4730-0037-02 HDI 4000 Field Service Manual Page 313 Scanheads: Scanhead Specifications Table 15-5 Scanhead Part Numbers (Continued) Scanhead Type Part Current Hardware Software and Name Number Dash Number Notes Compatibility 3D7-4 2175-0074 v1.00.01.030 and up Biopsy guide available 3D feature must be...
  • Page 314 4730-0037-02 HDI 4000 Field Service Manual Page 314 Scanheads: Scanhead Specifications Table 15-5 Scanhead Part Numbers (Continued) Scanhead Type Part Current Hardware Software and Name Number Dash Number Notes Compatibility L12-5 50 mm 4000-0762 v1.00.01.030 and up Biopsy guide available Alt.
  • Page 315: Glossary

    4730-0037-02 HDI 4000 Field Service Manual Page 315 Glossary: Acronyms and Abbreviations Glossary Acronyms and Abbreviations alternating current amperes analog-to-digital conversion Assy assembly black and white Customer Order Acknowledgment central processing unit continuous-wave digital to analog converter digital-to-analog converter direct current...
  • Page 316 4730-0037-02 HDI 4000 Field Service Manual Page 316 Glossary: Acronyms and Abbreviations NTSC National Television Standards Committee Original equipment manufacturer Phased Alternating Line Personal computer Printed circuit board Phased drive Pulsed-wave Radio frequency Receive, receiver S-VHS Super VHS, a VCR video format...
  • Page 317: Terms

    Help Sometimes referred to as online Help. System software files that provide instructions for use of the HDI 4000 system, on-screen, by pressing the ? button on the control panel. I-RGB Interlaced, red, green, and blue video. The system has a rear panel connector for video devices that use this type of video.
  • Page 318 4730-0037-02 HDI 4000 Field Service Manual Page 318 Glossary: Terms Phased Alternating European video standard -625-line, 50Hz composite video, usually Line color. Information in the manual set that describes precautions necessary WARNING to prevent injury or loss of life.

Comments to this Manuals

Symbols: 0
Latest comments: