Assembly - Weslo CADENCE G 3.9 User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
1. Go to www.iconservice.ca/CustomerService/
registration and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Service
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Service (see the front cover of this
manual) and register your product.
2. Make sure that the power cord is unplugged.
With the help of a second person, carefully
raise the Right and Left Uprights (56, 57) to the
vertical position. Then, slide the Uprights down
onto the top of the Base (35). Make sure not to
pinch any wires.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• To identify small parts, see page 7.
• Assembly requires the following tools:
the included hex keys
a Phillips screwdriver
To avoid damaging parts, do not use power tools.
1
2
8
57
56
35