Drain Pump; Circulation Pump - Samsung DMS400TR series Service Manual

3. Disassembly and Reassembly
Part

DRAIN PUMP

ASS'Y
CIRCULATION
PUMP ASS'Y
3-16
Photo
2) Remove the five (5) screws holding DRAIN PUMP
3) Remove the DRAIN PUMP ASS'Y.
1) Remove the screw holding GROUND WIRE in place.
2) Remove the DOUBLE WIRE SCREW CLAMP holding
5) You can remove the CIRCULATION PUMP ASS'Y.
Description
24. Drain pump ass'y
Separate top table ass'y
Separate housing L/R
Separate main pcb ass'y
Separate tub ass'y
Separate sump ass'y
1) Remove the two (2) DRAIN PUMP connectors.
ASS'Y in place.
Caution
* If necessary, rub with a dry towel remainning water
water in order to keep clean SUMP ASS'Y.
* In assembling, confirm the assembly condition of
contact sump gasket
* When sump gasket is deformation, you must change
new one
25.Circulation pump ass'y
Separate top table ass'y
Separate housing L/R
Separate main pcb ass'y
Separate tub ass'y
Separate sump ass'y
the C-PUMP OUTLET HOSE in place.
Caution
* If necessary, rub with a dry towel remainning water
water in order to keep clean SUMP ASS'Y.
* In assembling, confirm the assembly condition of
contact sump gasket
* When sump gasket is deformation, you must change
new one