Gimbal Initialization; Motion Control Speed Reference Table - FeiYu Tech vimble 2 User Manual

Motion control speed reference table

12 18 24
seconds seconds seconds
/ turn / turn / turn
2.Enter motion control mode by
clicking the function button 4 times
4.Set rotation end position
Pan axis
Tilting
Record the second position
(rotation end position) by
manually moving smartphone
to desired position. Hold in
position for half a second. Click
the function button to record
rotation end position.
Exit operations:
1.After auto-rotation is finish, the stabilizer automatically exits auto-rotation mode and enters the follow mode.
2.Enter the motion control mode or motion control setting, double click the trigger button to exit the motion
control mode and reset the gimbal.

Gimbal Initialization

Initialize gimbal when:
(1) Smartphone fails to remain level.
(3) Gimbal is used in extreme temperature variations.
Click the function button five times.
Themotors will stop working. Status
indicatorturns solid blue.
Note: if the initialization is not successful, click the function button to wake up. restart initialization process.
Vimble2 Rotation speed
30 1 2
seconds minute minutes
/ turn / turn / turn
3.Set rotation start position
5.The gimbal is motion control from rotation start position
to rotation end position
(2) Gimbal has no been used for a long period of time.
Place the gimbal on a flat, horizontal surface. The
gimbal will automatically initialize after a few
seconds detecting no movement. The blue light will
flash three times to indicate end of initialization.
4 8 15
minutes minutes minutes
/ turn / turn / turn
Tilt axis
Pan axis
Record the first position (rotation start position)
by manually moving smartphone to desired
position. Hold in position for half a second.
Click the function button to record rotation
start position.
6
30 1 4
minutes hour hours
/ turn /turn / turn
(default)
The stabilizer automatically returns to
the starting position, and the pitch axis
a n d t h e p a n a x i s s t a r t t o r o t a t e
uniformly to the ending position
according to the set rotation speed,
and enter the follow mode at the
ending position.
After the initialization is successful,
click the function button to wake up.
8
hours
/ turn