Replacing The Filter; Understanding The Healthy Air Protect Lock; Filter Alert Chart; Replacing The Filters - Philips AC3259 User Manual

6 Replacing the
filter
Understanding the
healthy air protect lock
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen (see Filter alert chart).
If the filters are not replaced in time,
the air purifier will stop operating and
automatically lock to protect the air
quality in the room. Replace the filters
as soon as possible according to the
filter code.

Replacing the filters

Note
• The air purification filters are not
washable nor vacuum cleanable.
• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
• Do not clean the filters with a with a
vacuum cleaner.
• If the pre-filter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or contact
the Consumer Care Center in your
country.

Filter alert chart

Filter alert light
status
A3 displays on the
screen
C7 displays on the
screen
A3 and C7 display
on the screen
alternately
1
Take out the used air filters
according to the filter code
displayed on the screen. Discard
used filters (fig.~).
Note
• Do not touch the pleated filter surface,
or smell the filter as it has collected
pollutants from the air.
2
Remove all packaging material of
the new filters (fig.f).
3
Place the new filters into the
appliance (fig.g).
4
Put the plug of the appliance in the
power socket.
5
Touch and hold the reset button
for 3 seconds to reset the filter
lifetime counter (fig.).
Note
• Wash your hands after changing the
filters.
Follow this
Replace
NanoProtect
filter Series 3
(FY3433)
Replace the
NanoProtect
filter AC
(FY3432)
Replace both
filters
EN
11