Configuration Via Web Interface - Keba KeContact P30 x series Configuration Manual

Configuration
4.3

Configuration via web interface

The necessary settings (main menu "Configuration") for the communication
between the charging stations are configured in the web interface. The con-
figuration for the entire charging network is done via the master charging
station.
A network connection is required to access the web interface of the master
charging station. The network connection can be made via LAN, WLAN,
WLAN access point or GSM (e.g. with PC or mobile device).
The web interface of the master charging station can be accessed by enter-
ing the IP address of the master charging station in a web browser.
The IP address of the master charging station is determined differently de-
pending on the connection type.
WLAN access point
Router with integrated
DHCP server
Master charging station
with local DHCP server
A login is required to use the web interface.
The login data for the first login in the web interface is printed on the configu-
ration label. The configuration label is in a pouch which is enclosed with the
mounting material. For security reasons, change the password after the ini-
tial login.
Illustration 4-7: Configuration label
After successful login, the start page of the web interface opens.
22
The IP address of the WLAN access point is printed on the con-
figuration label.
The charging station automatically receives an IP address via
the DHCP server of the router. The IP address is displayed on
the charging station display when the charging station is
(re)started. The IP address can also be determined via the
router.
The local DHCP server has been activated for the master
charging station, which automatically gives the master charging
station the following IP address: 192.168.42.1
The DHCP server of the charging station is deactivated in the
delivery state and can be activated via the configuration.
P30 x-series
Configuration manual V4.01
© KEBA