Advertisement
Available languages
Available languages
[7] Status display
Make the settings for the temperature to be displayed on the Status display.
[Button operation]
Move the cursor to "Status disp." from the display details setting screen, and select the desired
setting with the F4 button.
Each pressing the F4 button will toggle through the following options: Set temp., Room temp., and
Hide.
(3) Brightness
[Button operation]
Select the desired brightness for the remote controller LCD with the F1
and F2 buttons.
The ON/OFF of the Stay lit mode can be switched with the F4 button.
When "ON" is selected, the backlight will remain lit dimly even after the
specified time has elapsed.
Note: Adjust the brightness to improve viewing in different lighting conditions or
installation locations. This setting can not improve viewing from all
directions.
(4) Language selection
[Button operation]
Move the cursor to the language you desire with
the F1 through F4 buttons.
Press the SELECT button to save the setting.
(5) Design setting
The screen design can be set.
[Button operation]
Select the color option with the F4 button.
• Color: The display color can be selected.
• White: Monochrome display (white basis)
• Black: Monochrome display (black basis)
When "White" or "Black" is selected, press the SELECT button. When
"Color" is selected, select the following item with the F1 or F2 button, and
set the desired display color for each item.
• Color shade: Set the color shade with the F3 or F4 button. (The
settable range is -90 to 89.)
• Pattern: Set the color with the F4 button.
• Color set to: Select "Character" or "BG" (Background) as a target to
which the color is applied with the F4 button.
* At factory shipment, these items are set as follows.
CT01MAA(R)-S, SB
CT01MAA(R)-PB
Color option
Color shade
Color
-70
Color
-90
– 21 –
Pattern
Color set to
1
Character
2
Character
Advertisement
