Download Print this page

Mitsubishi Electric PAR-CT01MAA-SB Installation Manual page 14

City multi control system and mitsubishi mr. slim air conditioners ma touch remote controller
Hide thumbs Also See for PAR-CT01MAA-SB:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• Uninstalling the top case
1 Uninstalling the top case
Insert a flat-tip screwdriver with a blade width of 3-5 mm (1/8-7/32
inch) into the latches at the bottom of the remote controller and lift
the latches. Then, pull up the top case.
■ At the time of factory shipment, protective sheet is on the operation interface of the front
cover. Peel off the protective sheet on the operation interface prior to use.
Important
To prevent damage to the controller casing,
do not force the flat-tip screwdriver to turn
with its tip inserted in the slot.
Do not insert the flat-tip screwdriver too far.
Doing so will damage the circuit board.
To prevent damage to the controller casing,
use a flat-head screwdriver with a blade
width of 3-5 mm (1/8-7/32 inch).
– 14 –

Advertisement

loading