Download  Print this page

Understanding Settings - Philips IntelliVue MP5 Instructions For Use Manual

Patient monitor.
Hide thumbs

Advertisement

Table of Contents
2 Basic Operation
Swapping a Complete Profile
Select the monitor info line and then Profiles in the Setup menu, or select the
1
Profiles SmartKey.
2
In the Profiles menu, select Profile.
3
Chose a profile from the pop-up list.
4
Confirm your selection.
Swapping a Settings Block
Select the monitor info line and then Profiles in the Setup menu, or select the
1
Profiles SmartKey.
In the Profiles menu, select Display or Measmnt. Settings or
2
Monitor Settings to call up a list of the settings blocks in each category.
Choose a settings block from the pop-up list.
3
Confirm your selection.
4
Default Profile
Your monitor has a default profile that it uses when you leave Demonstration, or Service modes, or
when you discharge a patient. This profile is indicated by a diamond
Locked Profiles
Some profiles are locked, so that you cannot change them, even in Configuration Mode. These are
indicated by this lock symbol.

Understanding Settings

Each aspect of how the monitor works and looks is defined by a setting. There are a number of
different categories of settings, including,
Screen Settings, to define the selection and appearance of elements on each individual Screen
Measurement settings, to define settings unique to each measurement, for example, high and low
alarm limits
Monitor settings, including settings that affect more than one measurement or Screen and define
general aspects of how the monitor works, for example, alarm volume, reports and recordings, and
display brightness.
You must be aware that, although many settings can be changed in Monitoring Mode, permanent
changes to settings can only be done in the monitor's Configuration Mode. All settings are reset to the
stored defaults:
• when you discharge a patient
• when you load a Profile
24
Understanding Settings
.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: