Download  Print this page

Installation Safety Information - Philips IntelliVue MP5 Instructions For Use Manual

Patient monitor.
Hide thumbs

Advertisement

Table of Contents
31 Installation and Specifications
Symbols
electronic equipment (WEEE)

Installation Safety Information

If multiple instruments are connected to a patient, the sum of the leakage currents may exceed the
WARNING
limits given in IEC/EN60601-1, IEC60601-1-1, UL60601-1. Consult your service personnel.
Grounding
Equipotential
Grounding
Combining equipment Combinations of medical equipment with non-medical equipment must comply with
Fusing
Network Cables
Connectors
The actual placement of boards and configuration of connections for your monitor depends on how
your hardware has been configured. See the symbols table on page 296 to see which symbols are used
to mark the connections.
• Connect only medical devices to the ECG output connector socket.
WARNING
• Connecting the ECG sync out to external equipment should only be done by a qualified user. Do
not touch the patient when you have contact to the ECG output connector socket.
298
Always use separate
collection for waste
electrical and
Pressure connector
NBP connector
ECG connector
The monitor must be grounded during operation. If a three-wire receptacle is not
available, consult the hospital electrician. Never use a three-wire to two-wire adapter.
If the monitor is used in internal examinations on the heart or brain, ensure that the room
incorporates an equipotential grounding system to which the monitor has separate
connections.
IEC 60601-1-1. Never use a multiple portable socket-outlet or extension cord when
combining equipment unless the socket outlet is supplied specifically for use with that
equipment.
The monitor uses double pole/neutral fusing.
All network cables must be unshielded.
built-in wireless
network
Temperature connector
SpO
connector
2
Monitor supports 12-
lead ECG
Installation Safety Information
Error LED
Telemetry device
connector
Uses FAST SpO
algorithm
built-in short
range radio
interface
2

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: