Download  Print this page

Advertisement

Table of Contents
Setting Up Reports
Setting Up ECG Reports
The settings you choose in the ECG Reports menu apply for all ECG reports printed. To set up
ECG Reports,
Select Main Setup -> Reports -> ECG Reports. Note the report layout configured for
1
your monitor, either Internat. or Cabrera. This
and can only be changed in Configuration Mode.
Select ECG Gain and set the required ECG Gain to define how ECG waves will appear on the
2
ECG report printouts.
3
Select Speed and select the report print speed.
Select Annotation and toggle to On if the printed ECG wave should be annotated with beat
4
labels or not. See the chapter on ECG for a list of beat labels. Pace pulse marks are automatically
printed beside the wave for paced patients.
Setting Up Vital Signs and Graphic Trend Reports
The settings you choose in the Vital Signs Report and Graphical Trend Report
menus apply for all Vital Signs and Graphic Trend reports printed.
To set up Vital Signs and Graphic Trend reports,
1
Select Main Setup -> Reports -> Vital Signs Rep. or Graph Trend Rep.
Select Trend Group and select the group you want to print on the report. The groups available
2
depend on your monitor's trend configuration.
Select Period and select
3
Automatic Period
irrespective which trend period is selected.
4
Select Interval (Vital Signs Reports only) and select
report,
Setting Up Auto Reports
Auto Reports print automatically when a specified trigger occurs. There are two types of Auto Reports:
Scheduled Reports, which print at predefined intervals, and End Case Reports, which print when a
patient is discharged using the End Case function. An Auto Report can be both a Scheduled Report
and an End Case report.
To set up Auto Reports,
Select Main Setup -> Reports -> Auto Reports and select the Auto Report you want to set up (A, B,
1
C, or D).
2
Select Report and assign a report type to the Auto Report.
3
Select End Case Report and toggle to On if you want the selected report to print
automatically when you select End Case to discharge a patient.
Toggle End Case Report to Off if the report is a Scheduled Report only.
4
Select Scheduled Rep. and toggle to On if you want the selected report to print at predefined
intervals, starting at a predefined time of day. The start time you set applies for every following day.
For example, if you set a start time of 07:00 and a repeat time of six hours, the first report will print
at 07:00 every day, the next at 13:00 and so on.
setting is inactive ("grayed-out") in Monitoring Mode
the period of time for which trend data should be printed on the report. If
is configured to
, all trend data for the current patient will be printed,
On
23 Printing Patient Reports
the resolution of the trend data printed on the
247

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: