Download  Print this page

Troubleshooting - IDW G-10 Instruction Manual

G-series upright cooler.
Hide thumbs


Instruction Manual


The following are not Malfunctions:
Liquid fl owing noise within cooler
Refrigeration system is shutdown for
longer periods of time while temperature
inside is still very low.
Condensation on glass door
This refrigerator has been designed and manufactured according to National standards. If there are any questions
during use, refer to this operation manual to help troubleshoot problems.
When disposing of the cooler, please remove the door and lock assembly to avoid children accidentally becoming
trapped inside the cooler.
Any product has the possibility of malfunction. Please observe the cooler's operation and any changes to product being
stored. If there are any abnormal cases, refer to the table below. If there is still no change after following the below
instructions, please inform our service center in a timely manner to avoid a further loss of the unit.
Cooler is not functioning.
Cooler is not keeping product cool.
Excessive noise
Correct Disposal of this product
This marking idicates that this product should not be disposed of with other household
waste throughout the EU. To prevent possible harm to the environment or human health due
to uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collections system,
or contact the retailer where the product was purchased for instructions on disposal.
This liquid is the sound of the cooling agent fl owing through the pipes.
This refrigerator has a strong level of heat preservation and can main-
tain a relatively ambient temperature.
This may be due to a high indoor humidity or a low inside temperature
value may be set. Wipe the door dry with a towel.
Please check power supply:
• Fuse damage
• The plug is not securely inserted into the wall socket
• Check for low voltage
• Provide ample space between all products to ensure proper
circulation of air.
• Keep unit away from direct sunlight or other heating source.
• Keep door closed as often as possible.
• Be certain cooler is not touching external objects or walls.
• Be certain the cooler is placed on a level surface.
• Be certain cooler is not touching external objects or walls.


   Related Manuals for IDW G-10

   Related Content for IDW G-10

Comments to this Manuals

Symbols: 0
Latest comments: